Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Supply fresh air. Consult doctor in case of complaints.
Emergency measure - Eyes: Rinse opened eye for several minutes under running water. If
symptoms persist, consult a doctor.
Emergency measure - Skin: Remove contaminated clothing. Wash effected area immediately
with water and soap. Consult a doctor in case of complaints
.
Emergency measure - Ingestion: Consult a doctor immediately.

Fire-fighting measures

Recommended extinguishing agent: Water Fog, Carbon Dioxide, Dry Chemical, Foam.

Product arising from burning: Carbon, nitrogen and antimony oxides.

Product determined by test: N

Protective equipment: Chemical safety glasses or similar eye protection as
classified in BS2092. Nitrile, Neoprene or Butyl rubber
gloves or hand protection to a standard of EN374 should be
worn. Respiratory equipment should be used, such as a
respirator to a minimum standard of EN405 FFA1, and that
conforms to the appropriate international or national
standards to keep exposure concentrations below the
recommended limit value. Suitable clothing that meets the
standard EN368 should be worn.

Accidental release measures

Emergency measures in case of spillage: Wear personal protective equipment as described in 2.3.40.
Cover with dust reducing agent; e.g. sand, universal
binders, sawdust. Do not allow to enter sewers, surface or
ground water. Inform respective authorities in case of
seepage into water course or sewage system. Fill materials
should be collected and stored in closed, labeled containers
for disposal. Dispose of waste material in accordance with
local regulations.

Handling and storage

Handling: Avoid generation of dust. Wear protective clothing,
including dust mask or respirator.

Storage: Substance should be stored at 4°C or less for maximum shelf
life. Avoid exposure to moisture or elevated temperatures.
Product should be stored in tightly sealed original
containers.

Packaging of the substance and or preparation: Subtance is packaged in 1.0 kg and 2.25 kg(net) plastic
containers. Preparation is packaged in 5-500 ml syringe as
a viscous liquid.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Transport: Not regulated under ADR, IMDG, ICAO-TI and IATA-DGR
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: No dangerous reactions expected based on a review of the
Brethericks Handbook of Reactive Chemical Hazards 6th ed.
(1999).

Chemical reaction with water: No dangerous reactions with water.

Dust explosion: Due to presence of antimony and the rather large particle
size, we do not anticipate that there will be a significant
dust hazard.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of in accordance with local regulations. In
principle, it may be possible to recover larger spills of
uncontaminated material for subsequent use.

Industry - Possibility of neutralisation: Upon exposure to moisture, substance will hydrolyze to
Antimony oxide, Hydrofluoric acid, and substituted aniline
compound. Treatment with caustic soda will neutralize the
acid and a slight exotherm will develop.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spllages of solutions mixed with
inert material (e.g. sand or soil) may be disposed of at an
authorized facility in accordance with local regulations.

Industry - Possibility of destruction - incineration: The substnace can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (e.g. carbon,
nitrogen and antimony oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not be discharged directly to the
sewage system or the aqueous environment.

Public at large - Possibility of recovery/recycling: Not for public use.

Public at large - Possibility of neutralisation: Not for public use.

Public at large - Possibility of destruction: controlled discharge: Not for public use.

Public at large - Possibility of destruction - incineration: Not for public use.

Public at large - Possibility of destruction - water purification: Not for public use.

Public at large - Possibility of destruction - others: Not for public use.