Registration Dossier

Administrative data

First-aid measures

General information:
Immediately remove any clothing soiled by the product.

After inhalation:
In case of unconsciousness, place patient stably in side position for transportation.
Supply fresh air; consult doctor in case of complaints.

After skin contact:
Immediately wash with water and soap and rinse thoroughly.

After eye contact:
Rinse opened eye for several minutes under running water.
Then consult a doctor.

After swallowing:
Drink plenty of water and provide fresh air.
Call for a doctor immediately.

Most important symptoms and effects, both acute and delayed
No further relevant information available.

Indication of any immediate medical attention and special treatment needed
No further relevant information available.

Fire-fighting measures

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray.
Use fire extinguishing methods suitable to surrounding conditions.

For safety reasons unsuitable extinguishing agents: Water with full jet

Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.

Advice for firefighters
Protective equipment:
Wear mouth and respiratory protective device.
Wear self-contained respiratory protective device

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment.
Keep unprotected persons away.

Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.

Methods and material for containment and cleaning up:
Use neutralising agent.
Must not be disposed together with household garbage.
Do not allow product to reach sewage system.
Disposal must be made according to official regulations.
Ensure adequate ventilation.

Handling and storage

Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.

Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke. Keep respiratory protective device available.

Conditions for safe storage, including any incompatibilities Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.

Information about storage in one common storage facility:
Do not store together with oxidising and acidic materials as well as heavy-metal compounds.

Further information about storage conditions:
Keep container tightly sealed.
Store receptacle in a well-ventilated area

Specific end use(s) No further relevant information available.

Transport information

Land transport (ADR/RID)

UN number:
2735
Proper shipping name and description:
2735 AMINES, LIQUID, CORROSIVE, N.O.S. (2,2-Bis (2-aminopropoxy)propane), ENVIRONMENTALLY HAZARDOUS AMINES, LIQUID, CORROSIVE, N.O.S. (2,2-Bis (2-aminopropoxy)propane)
Chemical name:
2,2-Bis (2-aminopropoxy)propane
Language:
English
Class:
8 Corrosive substances
Packaging group:
III
Labels:
8
Special Provisions:
Warning: Corrosive substances
Remarks:
SG35 Stow "separated from" SGG1-acids
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2735
Proper shipping name and description:
2735 AMINES, LIQUID, CORROSIVE, N.O.S. (2,2-Bis (2-aminopropoxy)propane), ENVIRONMENTALLY HAZARDOUS AMINES, LIQUID, CORROSIVE, N.O.S. (2,2-Bis (2-aminopropoxy)propane)
Chemical name:
2,2-Bis (2-aminopropoxy)propane
Class:
8 Corrosive substances
Packaging group:
III
Labels:
8
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
2735
Proper shipping name and description:
2735 AMINES, LIQUID, CORROSIVE, N.O.S. (2,2-Bis (2-aminopropoxy)propane), ENVIRONMENTALLY HAZARDOUS AMINES, LIQUID, CORROSIVE, N.O.S. (2,2-Bis (2-aminopropoxy)propane)
Chemical name:
2,2-Bis (2-aminopropoxy)propane
Class:
8 Corrosive substances
Packaging group:
III
Labels:
8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Ingredients with limit values that require monitoring at the workplace: Not required. Additional information: The lists valid during the making were used as basis.

Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.

Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device.
In case of intensive or longer exposure, use self-contained respiratory protective device.
Use suitable respiratory protective device in case of insufficient ventilation.

Protection of hands:
Protective gloves: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eye protection:
Safety glasses
Tightly sealed goggles

Body protection: Protective work clothing

Stability and reactivity

Reactivity: No further relevant information available.

Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used and stored according to specifications.

Possibility of hazardous reactions: Reacts with alcohols, amines, aqueous acids and alkalis.

Conditions to avoid: No further relevant information available.

Incompatible materials: Acids, bases, amines and oxidizing agent.

Hazardous decomposition products: Carbon monoxide and carbon dioxide

Disposal considerations

Waste treatment methods Recommendation: Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging: Recommendation: Disposal must be made according to official regulations.