Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

- General advice:

Take off immediately all contaminated clothing.

- Following inhalation:

Upon inhalation of aerosol/vapour/dust: Take the patient into the fresh air; if there is difficulty in breathing, medical advice is required.

- Following skin contact:

Remove all contaminated clothing immediately. Cleansing with plenty of water, soap or other non-irritating cleansing agents.

- Following eye contact:

Contamination of the eyes must be treated by thorough irrigation with water, with the eyelids held open. A doctor (or eye specialist ) should be consulted immediately.

- Following ingestion:

If the product is swallowed, the patient must at once drink water repeatedly, if possible with the addition of activated carbon. If the patient feels unwell, seek medical advice.

- Most important symptoms and effects: May cause an allergic skin reaction.

Fire-fighting measures

- Suitable extinguishing media:

Water spray, foam, dry powder.

- Unsuitable extinguishing media (extinguishing media that must not be used for safety reasons): CO2

- Special hazards arising from the substance or mixture:

not determined

- Advice for fire fighter: Special protective equipment for firefighting: Firemen have to wear self-contained breathing apparatus. Further information: Fire residues and contaminated firefighting water must be disposed of in accordance with the local regulations.

Accidental release measures

- Personal precautions, protective equipment and emergency procedures:

Avoid formation and deposition of dust.

- Environmental precautions:

Do not empty into drains or waters.

- Methods and material for containment and cleaning up: Take up spilled product with dust-binding material or suitable vacuum cleaner. Fill into labelled, sealable containers.

Handling and storage

Precautions for safe handling:

- Advice on safe handling: Avoid formation and deposition of dust. Keep container tightly closed and dry.

- Advice on protection against fire and explosion: Observe the usual precautionary measures required for chemicals with dust-explosive properties. Observe national regulations.

Conditions for safe storage, including any incompatibilities:

- Requirements for storage rooms and vessels: Store in original container in a cool, dry place. In filling operations take precautionary measures against static discharges.

- Storage class: 11 Combustible solids

- Storage stability: Storage period: 60 Months

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

Shippingopen allclose all
Special provisions / remarks
Remarks:
Keep separated from foodstuffs.
- Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code: No transport in bulk according to Annex II of MARPOL 73/78 and the IBC code foreseen for this substance or mixture.

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Keep separated from foodstuffs.
- Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code: No transport in bulk according to Annex II of MARPOL 73/78 and the IBC code foreseen for this substance or mixture.

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Keep separated from foodstuffs.
- Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code: No transport in bulk according to Annex II of MARPOL 73/78 and the IBC code foreseen for this substance or mixture.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

- Ingredients with occupational exposure limits to be monitored: not applicable

Exposure controls

- General protective measures: Do not breathe dust. Avoid contact with eyes and skin. Take off immediately all contaminated clothing.

- Inhalation of dust and aerosols must be absolutely prevented by either adequate ventilation or by a suitable mask. People with chron ic respiratory problems should not work with reactive dyestuff powders. If symptoms such as tightness in the chest or asthma occur w hile handling reactive dyestuff powders, a physician should be consulted as soon as possible. If hypersensitivity is confirmed, all contact with reactive dyestuff powders must cease immediately.

- Hygiene measures: Keep away from food and drink stuffs. Do not eat, drink or smoke at work. Wash hands before breaks and at end of work and use skin-protecting ointment.

- Respiratory protection: Dust mask with particle filter.

- Hand protection: Wear suitable gloves e.g. of PVC or nitrile rubber. In the event of contamination, change protective gloves immediately.

- Eye protection: safety glasses with side protection shield

- Body protection: Wear protective clothing.

Stability and reactivity

1. Reactivity

: No hazardous reactions when stored and handled according to prescribed instructions.

2. Chemical stability

:

- Thermal decomposition: No thermal decomposition when stored and handled correctly.

3. Possibility of hazardous reactions

:

- Hazardous reactions: In the case of dusty organic products the possibility of a dust explosion should always be considered.

- Hazardous decomposition products: not applicable

4. Conditions to avoid

: For avoidable conditions: not necessary

5. Incompatible materials

: For avoidable materials: not necessary

6. Hazardous decomposition products: not applicable

Disposal considerations

Waste treatment methods:

- Product: If utilization or recycling of the product is not possible, it should be disposed of according to the local regulations and laws, e.g. by incineration in a suitable plant.

- European Waste Catalogue (EWC) code: 040216 Dyestuffs and pigments containing dangerous substances

- Uncleaned packaging: Soiled, empty containers are to be treated in the same way as the contents.