Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 202-928-3 | CAS number: 101-25-7
Guidance on Safe Use
Administrative data
First-aid measures
General information
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if
possible). When in doubt or if symptoms are observed, get medical advice.
Following inhalation: Provide fresh air. In case of respiratory tract irritation, consult a physician. In case of inhalation of decomposition
products, affected person should be moved into fresh air and kept still.
In case of skin contact: After contact with skin, wash immediately with plenty of water and soap. After contact with molten product, cool skin
area rapidly with cold water. Do not peel solidified product off the skin. Immediate medical treatment required
because corrosive injuries that are not treated are hard to cure. In case of skin irritation, consult a physician.
After eye contact: In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart
and consult an ophthalmologist. Protect uninjured eye.
After ingestion: If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate
medical attention.
Most important symptoms and effects, both acute and delayed: no information available.
Indication of any immediate medical attention and special treatment needed: None
Fire-fighting measures
Extinguishing media
Suitable extinguishing media: Water spray jet alcohol resistant foam Excess water
Unsuitable extinguishing media: High power water jet
Special hazards arising from the substance or mixture: In case of fire may be liberated: Carbon monoxide Carbon dioxide (CO2)
Advice for firefighters: In case of fire: Wear self-contained breathing apparatus.
Additional information: Co-ordinate fire-fighting measures to the fire surroundings. Do not inhale explosion and combustion gases. Use water
spray jet to protect personnel and to cool endangered containers. Collect contaminated fire extinguishing water
separately. Do not allow entering drains or surface water.
Accidental release measures
Personal precautions, protective equipment and emergency procedures
Provide adequate ventilation. Avoid dust formation. Use personal protection equipment. Special danger of slipping by
leaking/spilling product.
Environmental precautions: Do not allow to enter into surface water or drains. Cover drains. Do not allow to enter into soil/subsoil.
Methods and material for containment and cleaning up: Take up mechanically. Treat the recovered material as prescribed in the section on waste disposal.
Reference to other sections: None
Handling and storage
Precautions for safe handling
All work processes must always be designed so that the following is as low as possible: Inhalation of dust/particles If
handled uncovered, arrangements with local exhaust ventilation have to be used. It is recommended to design all work
processes always so that the following is excluded: Eye contact Only use the material in places where open light, fire
and other flammable sources can be kept away. Wear personal protection equipment (refer to section 8).
Protective measures: Technical measures All work processes must always be designed so that the following is excluded: Inhalation of
dust/particles Inhalation of vapours or spray/mists All work processes must always be designed so that the following is
as low as possible: Dust deposits
Measures to prevent fire:The product is: Flammable Dust can form an explosive mixture with air. Keep away from sources of heat (e.g. hot
surfaces), sparks and open flames. Provide earthing of containers, equipment, pumps and ventilation facilities. Take
precautionary measures against static discharges.
Measures to prevent aerosol and dust generation: Provide adequate ventilation as well as local exhaustion at critical locations. During filling, metering, mixing and sampling must be used: Devices with local exhaust Dust must be exhausted directly at the point of origin. For
cleaning, approved industrial vacuum cleaners must be used, dust class: St1
Environmental precautions: See section 8 of SDS
Advices on general occupational hygiene: When using do not eat, drink, smoke, sniff.
Conditions for safe storage, including any incompatibilities
Requirements for storage rooms and vessels
Keep/Store only in original container. Ensure adequate ventilation of the storage area. Maximum storage temperature
up to 50°C
Hints on joint storage
Storage class (VCI) : 5.2
Storage class (TRGS 510) : 5.2
Do not store together with: Acid Oxidising agent Food and feedingstuffs
Further information on storage conditions: Keep container tightly closed in a cool, well-ventilated place.
Protect against : Humidity. UV-radiation/sunlight
Specific end use(s): None
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Control parameters : None
Exposure controls
Personal protection equipment : Eye/face protection
Suitable eye protection : Eye glasses with side protection
Skin protection: Hand protection: Suitable material : NBR (Nitrile rubber)
Additional hand protection measures : Check leak tightness/impermeability prior to use. Do not wear gloves
near rotary machines and tools. Wear cotton undermitten if possible. Take recovery periods for skin regeneration.
Body protection : Suitable protective clothing : lab coat Overall Disposable suit
Remark : Only wear fitting, comfortable and clean protective clothing. Barrier creams are not substitutes for body
protection.
Respiratory protection : Respiratory protection necessary at: exceeding exposure limit values
Suitable respiratory protection apparatus : Half-face mask or quarter facepiece: maximum use concentration for substances with exposure limits: P1 filter: up
to a max. of 4 times the exposure limit. P2 filter: up to a max. of 10 times the exposure limit. P3 filter: up to a max.
of 30 times the expo
Remark : The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that
may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be
used.
General health and safety measures : Wash hands before breaks and after work. When using do not eat, drink, smoke, sniff. Remove contaminated,
saturated clothing immediately. Separate storage of work clothes.
Stability and reactivity
Reactivity: No information available.
Chemical stability: No information available.
Possibility of hazardous reactions: Danger of dust explosion. Due to gaseous decomposition products, overpressure can occur in tightly sealed containers. Danger of bursting container.
Conditions to avoid: In case of exceeding the storage temperature: Due to gaseous decomposition products, overpressure can occur in
tightly sealed containers.
Incompatible materials: No information available.
Hazardous decomposition products: Carbon dioxide (CO2)
Disposal considerations
Waste treatment methods
Product/Packaging disposal
The allocation of waste identity numbers/waste descriptions must be carried out according to the EEC, specific to the
industry and process. Before self-disposal of the waste, it is necessary to determine whether transfer duties or sell
obligations are observed.
Waste treatment options
Appropriate disposal / Product
Dispose of waste according to "Kreislaufwirtschafts- und Abfallgesetz (KrW-/AbfG)".
Appropriate disposal / Package
Non-contaminated packages may be recycled. Handle contaminated packages in the same way as the substance
itself.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
