Registration Dossier

Administrative data

First-aid measures

General information Remove affected person from source of contamination. Get medical attention.

Inhalation Remove person to fresh air and keep comfortable for breathing. Place unconscious person on
their side in the recovery position and ensure breathing can take place. Maintain an open
airway. Loosen tight clothing such as collar, tie or belt. When breathing is difficult, properly
trained personnel may assist affected person by administering oxygen. If breathing stops,
provide artificial respiration. Get medical attention.

Ingestion Move affected person to fresh air and keep warm and at rest in a position comfortable for
breathing. Loosen tight clothing such as collar, tie or belt. Do not induce vomiting unless
under the direction of medical personnel. Rinse nose and mouth with water. Never give
anything by mouth to an unconscious person. Place unconscious person on their side in the
recovery position and ensure breathing can take place. Get medical attention.

Skin contact Rinse immediately contaminated clothing and skin with plenty of water before removing
clothes. Wash with plenty of water. Continue to rinse for at least 15 minutes. Get medical
attention if any discomfort continues.


Eye contact Remove affected person from source of contamination. Remove any contact lenses and open
eyelids wide apart. Rinse with water. Continue to rinse for at least 15 minutes and get medical
attention.

Protection of first aiders First aid personnel should wear appropriate protectiive equipment during any rescue

Fire-fighting measures

Extinguishing media
Suitable extinguishing media Use fire-extinguishing media suitable for the surrounding fire. Extinguish with alcohol-resistant
foam, carbon dioxide, dry powder or water fog.

Unsuitable extinguishing
media

Do not use water jet as an extinguisher, as this will spread the fire.

Special hazards arising from the substance or mixture
Specific hazards Thermal decomposition or combustion products may include the following substances: Toxic
and corrosive gases or vapours.

Hazardous combustion
products

Thermal decomposition or combustion products may include the following substances: Toxic
and corrosive gases or vapours. Carbon monoxide (CO).

Advice for firefighters
Protective actions during firefighting

In case of fire: Evacuate area. No action shall be taken without appropriate training or
involving any personal risk. Fight fire from safe distance or protected location. Keep upwind to
avoid inhalation of gases, vapours, fumes and smoke. Cool containers exposed to heat with
water spray and remove them from the fire area if it can be done without risk. Contain and
collect extinguishing water. Avoid the spillage or runoff entering drains, sewers or
watercourses. If risk of water pollution occurs, notify appropriate authorities.

Special protective equipment for firefighters

Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
clothing. Firefighter's clothing conforming to European standard EN469 (including helmets,
protective boots and gloves) will provide a basic level of protection for chemical incidents.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precautions No smoking, sparks, flames or other sources of ignition near spillage. Take precautionary
measures against static discharges. Do not touch or walk into spilled material. Avoid
inhalation of vapours and contact with skin and eyes. Do not enter storage areas or confined
spaces unless adequately ventilated. Use suitable respiratory protection if ventilation is
inadequate. Wear protective clothing as described in Section 8 of this safety data sheet.

Environmental precautions

Environmental precautions Avoid or minimise the creation of any environmental contamination. Avoid the spillage or
runoff entering drains, sewers or watercourses. Environmental Manager must be informed of
all major spillages. Spillages or uncontrolled discharges into watercourses must be reported
immediately to the Environmental Agency or other appropriate regulatory body.

Methods and material for containment and cleaning up
Methods for cleaning up Wear protective clothing as described in Section 8 of this safety data sheet. Eliminate all
ignition sources if safe to do so. If involved in a fire, shut off flow if it can be done without risk.
Provide adequate ventilation. Do not touch or walk into spilled material. To prevent release,
place container with damaged side up. Absorb in vermiculite, dry sand or earth and place into
containers. Remove spillage with vacuum cleaner or collect with a shovel and broom, or
similar. Collect and place in suitable waste disposal containers and seal securely..

Handling and storage

Precautions for safe handling
Usage precautions For use in industrial installations or professional treatment only. Do not handle until all safety
precautions have been read and understood. Do not eat, drink or smoke when using this
product. Wear protective clothing as described in Section 8 of this safety data sheet. Do not
handle broken packages without protective equipment. Avoid breathing vapour/spray.
Mechanical ventilation or local exhaust ventilation may be required. If ventilation is
inadequate, suitable respiratory protection must be worn. Keep away from heat, hot surfaces,
sparks, open flames and other ignition sources. No smoking. Take precautionary measures
against static discharges. Do not empty into drains.

Advice on generaloccupational hygiene

Do not smoke in work area. Good personal hygiene procedures should be implemented.
Wash at the end of each work shift and before eating, smoking and using the toilet. Wash
promptly if skin becomes contaminated. Take off immediately all contaminated clothing and
wash it before reuse. Eye wash facilities and emergency shower must be available when
handling this product. Warn cleaning personnel of any hazardous properties of the product.

Conditions for safe storage, including any incompatibilities
Storage precautions Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking. Keep in a cool, well ventilated place. Store at temperatures between 7°C/44°F and
35°C/95°F. Protect from freezing and direct sunlight. Protect from light. Keep away from food,
drink and animal feeding stuffs. Keep away from oxidising materials, heat and flames. Store in
a demarcated bunded area to prevent release to drains and/or watercourses.

Storage class Chemical storage.

Transport information

Land transport (ADR/RID)

UN number:
Not applicable
Shippingopen allclose all
Class:
Not applicable
Classification code:
Not applicable
Packaging group:
Not applicable
Labels:
Not applicable
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not applicable
Shippingopen allclose all
Class:
Not applicable
Classification code:
Not applicable
Packaging group:
Not applicable
Labels:
Not applicable
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not applicable
Proper shipping name and description:
Not applicable
Chemical name:
Not applicable
Class:
Not applicable
Packaging group:
Not applicable
EmS code:
Not applicable
Labels:
Not applicable
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not applicable
Proper shipping name and description:
Not applicable
Chemical name:
Not applicable
Class:
Not applicable
Packaging group:
Not applicable
Labels:
Not applicable
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection


Appropriate engineering controls

Provide adequate ventilation. Mechanical ventilation or local exhaust ventilation may be
required. Observe any occupational exposure limits for the product or ingredients. Static
electricity and formation of sparks must be prevented.

Eye/face protection Tight-fitting safety glasses. Personal protective equipment for eye and face protection should
comply with European Standard EN166. If inhalation hazards exist, a full-face respirator may
be required instead.

Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn if
a risk assessment indicates skin contact is possible. To protect hands from chemicals, gloves
should comply with European Standard EN374. For exposure up to 4 hours, wear gloves
made of the following material: Butyl rubber. Nitrile rubber. Thickness: ~ 0.4 mm The most
suitable glove should be chosen in consultation with the glove supplier/manufacturer, who can
provide information about the breakthrough time of the glove material. Considering the data
specified by the glove manufacturer, check during use that the gloves are retaining their
protective properties and change them as soon as any deterioration is detected. Frequent
changes are recommended.

Other skin and bodyprotection

Wear appropriate clothing to prevent any possibility of liquid contact and repeated or
prolonged vapour contact. Refer to European Standard EN 1149 for information on material
and design requirements and test methods.

Hygiene measures Provide eyewash station and safety shower. Good personal hygiene procedures should be
implemented. Wash promptly if skin becomes contaminated. Take off immediately all
contaminated clothing and wash it before reuse. Change work clothing daily before leaving
workplace. Do not eat, drink or smoke when using this product. Wash at the end of each work
shift and before eating, smoking and using the toilet.

Respiratory protection Respiratory protection complying with an approved standard should be worn if a risk
assessment indicates inhalation of contaminants is possible. Full face mask respirators with
replaceable filter cartridges should comply with European Standard EN136. Check that the
respirator fits tightly and the filter is changed regularly. In confined or poorly-ventilated spaces,
a supplied-air respirator must be worn. Ensure all respiratory protective equipment is suitable
for its intended use and is ‘CE’-marked.

Environmental exposure controls

Emissions from ventilation or work process equipment should be checked to ensure they
comply with the requirements of environmental protection legislation

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None reported

Dust explosion: Not applicable

Dust explosion determined by test: N

Disposal considerations

Waste treatment methods
General information When handling waste, the safety precautions applying to handling of the product should be
considered. Waste, residues, empty containers, discarded work clothes and contaminated
cleaning materials should be collected in designated containers, labelled with their contents.
Dispose of surplus products and those that cannot be recycled via a licensed waste disposal
contractor. Disposal of this product, process solutions, residues and by-products should at all
times comply with the requirements of environmental protection and waste disposal legislation
and any local authority requirements. Do not cut or weld used containers unless they have
been thoroughly cleaned internally.

Disposal methods Dispose of contents/container in accordance with national regulations. Waste is suitable for
incineration.