Registration Dossier

Administrative data

First-aid measures

Eyes: Irriqate eyes immediately with copious amounts of water. Continue irrigation for at least 15 minutes. Seek medical attention.
Skin: Remove contaminated clothinq and wash affected area with copious amounts of water. If signs of irritation persist, seek medical attention.
Ingestion: Do not induce vomiting. Rinse out mouth with water and seek immediate medical attention.
Inhalation: Remove individual to fresh air. If breathing is difficult give oxygen. If breathing ceases give artificial respiration. If signs of toxicity occur, seek medical attention.

Fire-fighting measures

Recommended extinguishing agents: Use carbon dioxide, foam or dry chemical extinguishers.
Products arising from burning or pyrolysis: Oxides of carbon and nitrogen.
Protective equipment: Standard fire-fighting equipment should be worn along with self-contained breathing apparatus.

Accidental release measures

Protective clothing should be worn including oil impervious gloves, safety spectacles or goggles and respirator. Sweep up powder, minimising dust, and transfer solid waste to a suitable sealable container. The spillage site should then be washed with water. The spillage site should then be washed with water. Prevent run-off from entering drains, sewers and streams.

Handling and storage

Handling: oil impervious gloves should be worn as well as safety spectacles/goggles and respirator. Local exhaust ventilation may be desired.
Storage: store in sealed unbreakable containers, in a cool dry place protected from light and away from strong oxidisers.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarks
Packaging of the substance:
Metal drum - 160 kg (200 litre)
Metal can - 16 kg (20 litre)
Some containers have a detachable inner polyethylene liner.

Air transport ICAO/IATA

Remarks
Containers should be transported upright and secured against falling over. Containers should be suitably labelled and sealed.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Oil impervious gloves should be worn as well as safety spectacles/goggles and respirator. Local exhaust ventilation may be desired.

Stability and reactivity

Stable

Disposal considerations

No practical means of recovery or recycling are known. No neutralisation method is known. Controlled discharge not recommended.
The substance should be disposed of by incinerationin a closed-cycle incinerator with srubbers in accordance with local or national regulations.