Registration Dossier

Administrative data

First-aid measures

After inhalation: fresh air. Consult doctor if feeling unwell.
After skin contact: wash off with plenty of water. Remove contaminated clothing.
After eye contact: rinse out with plenty of water.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Most important symptoms and effects, both acute and delayed: irritant effects
Indication of any immediate medical attention and special treatment needed: No information available.

Fire-fighting measures

Suitable extinguishing media: Water, Foam, Carbon dioxide (CO2), Dry powder
Unsuitable extinguishing media: For this substance/mixture no limitations of extinguishing agents are given.
Special hazards arising from the substance or mixture: Vapours are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire.
Advice for firefighters
Special protective equipment for firefighters: Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Further information: Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

Personal precautions: Advice for non-emergency personnel: Do not breathe vapours, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Environmental precautions: Do not let product enter drains.
Methods and material for containment and cleaning up: Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions. Take up with liquid-absorbent material (e.g. Chemizorb®). Dispose of properly. Clean up affected area.

Handling and storage

Precautions for safe handling: Observe label precautions. Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
Conditions for safe storage, including any incompatibilities: Tightly closed. Store at +5°C to +30°C.

Transport information

Land transport (ADR/RID)

UN number:
Not classified as dangerous in the meaning of transport regulations.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not relevant.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classified as dangerous in the meaning of transport regulations.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified as dangerous in the meaning of transport regulations.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures: Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
Individual protection measures
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.
Eye/face protection: Safety glasses
Hand protection:
full contact:
Glove material: Nitrile rubber
Glove thickness: 0,11 mm
Break through time: > 480 min

splash contact:
Glove material: Nitrile rubber
Glove thickness: 0,11 mm
Break through time: > 480 min
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact).
This recommendation applies only to the product stated in the safety data sheet<(>,<)> supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Other protective equipment: protective clothing
Respiratory protection: required when vapours/aerosols are generated.

Stability and reactivity

Reactivity: Forms explosive mixtures with air on intense heating.
Chemical stability: The product is chemically stable under standard ambient conditions (room temperature).
Possibility of hazardous reactions: no information available
Conditions to avoid: A range from approx. 15 Kelvin below the flash point is to be rated as critical. Strong heating.
Incompatible materials: no information available
Hazardous decomposition products: no information available

Disposal considerations

Accordin to national Regulations.