Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Skin Contact: Immediately flush with water for 15 minutes. Wash the contaminated skin with soap and water. If irritation develops, call a physician.
Eye Contact: Immediately flush eyes with plenty of water. Get medical attention, if irritation persists.
Inhalation: Remove from exposure. If not breathing, give artificial respiration and call a physician.
Ingestion: If swallowed, contact physician or poison control center immediately.

Fire-fighting measures

Appropriate Extinguishing Media: Water spray, water fog, alcohol-resistant foam, carbon dioxide, dry chemical.
Hazardous Products of Combustion: Irritating and/or toxic fumes may be released if this material is burned.
Basic Fire Fighting Guidance: Wear self-contained breathing apparatus and full protective clothing (ie Bunker gear). Skin and eye contact should be avoided. Normal fire fighting procedures may be used.

Accidental release measures

Evacuation Procedures: Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Personal precautions: Remove all contaminated clothing to prevent further absorption. Leather shoes that have been saturated must be discarded.
Environmental precautions: Prevent releases to soils, drains, sewers and waterways.
Methods and material for containment and cleaning up: Isolate hazard area. Keep unnecessary and unprotected personnel from entering. Remove all ignition sources. Ventilate the area of spill or leak. Wear protective equipment during clean-up.
For small spills, use suitable absorbent material and collect for later disposal. For large spills, the area may require diking to contain the spill. Material can then be collected (eg suction) for later disposal. After collection of material, flush area with water. Dispose of the material in accordance with standard practice for disposal of potentially hazardous materials as required by applicable regional or national regulations.

Handling and storage

Precautions for safe handling: Wear appropriate protective equipment when performing maintenance on contaminated equipment. Wash hands thoroughly before eating or smoking after handling this material. Do not eat, drink or smoke in work areas. Prevent contact with incompatible materials. Avoid spills and keep away from drains. Handle in a manner to prevent generation of aerosols, or vapors.
Storage Precautions & Recommendations: This product should be stored at ambient temperature in a dry, well-ventilated location. Protect containers against physical damage. Keep away from heat, sparks, and flame. Containers should be periodically inspected.
Dangerous Incompatibility Reactions: Oxidizing materials

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not applicable - The substance is not classified for transport.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not applicable - The substance is not classified for transport.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not applicable - The substance is not classified for transport.
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not applicable - The substance is not classified for transport.
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering Controls: All operations should be conducted in well-ventilated conditions. Local exhaust ventilation should be
provided.
Personal Protective Equipment: Safety glasses or chemical goggles. Rubber or nitrile gloves are recommended where contact is likely. Where overexposures are a concern, use an approved respirator as necessary. Air-purifying respirators must not be used in oxygen-deficient atmospheres.
Environmental Exposure Controls: The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Select controls based on a risk assessment of local circumstances. If user operations generate fumes, vapor or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.

Stability and reactivity

Reactivity: Not classified as dangerously reactive.
Chemical stability: Stable
Possibility of hazardous reactions: Will not autopolymerize.
Conditions to avoid: Strong oxidizers.
Incompatible materials: Oxidizing materials
Hazardous decomposition products: Decomposition products may include carbon monoxide, carbon dioxide

Disposal considerations

Dispose of this material responsibly, and in accordance with standard practice for disposal of potentially hazardous materials as required by applicable international, national, regional, state or local laws, and environmental protection duty of care principles. Do NOT dump into any sewers, on the ground, or into any body of water. For disposal within the EC, the appropriate classification code according to the European Community List of Wastes should be used. Note that disposal regulations may also apply to empty containers and equipment rinsates.