Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Explosiveness
Administrative data
Link to relevant study record(s)
- Endpoint:
- explosiveness
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- From 1996-01-04 to 1996-05-09
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: see 'Remark'
- Remarks:
- GLP study in accordance with recognised test guideline but: Lot/batch No.: not stated Expiration date of the lot/batch: not stated NOTE: study deemed acceptable because spectral data for A-3622 are available, covering before and after the test period - see section 1.4 Analytical Information.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.14 (Explosive properties)
- Deviations:
- no
- GLP compliance:
- yes
- Specific details on test material used for the study:
- - Substance type: Organic
- Physical state: Solid
- Composition of test material, percentage of components: relative proportions components 1, 2 and 3 are 100:60:40 - Parameter:
- thermal sensitivity - Koenen test: diameter of the orifice plate
- Remarks on result:
- negative (not further specified)
- Parameter:
- sensitiveness to impact: impact energy (J)
- Remarks on result:
- not sensitive to impact using an impact energy of 40 J
- Parameter:
- sensitiveness to friction: friction load (N)
- Remarks on result:
- not sensitive to friction using a friction load of 360 N
- Interpretation of results:
- other: not explosive
- Conclusions:
- The test item is not explosive.
- Executive summary:
Explosivity due to thermal and mechamical sensitivity was determined in accordance with EEC Method A14. The test item is not explosive.
Reference
Thermal sensitivity - Koenen test
Nozzle plate orifice diameter |
T1 (seconds) |
T2 (seconds) |
6 mm |
|
|
Test 1 Test 2 Test 3 |
12 11 11 |
300 300 300 |
2 mm |
|
|
Test 1 Test 2 Test 3 |
10 15 8 |
300 300 300 |
Where T1 = time from start of test to flame from nozzle
T2 = time from start of test to explosion, or end of test (300 seconds)
Mechanical sensitivity (shock) - BAM Fall hammer test
Result: 0,0,0,0,0,0
Where 0 = No evidence of ignition or explosion.
Mechanical sensitivity (friction) - BAM Friction test
Result: 0,0,0,0,0,0
Where 0 = No evidence of ignition or explosion.
Description of key information
Explosivity due to thermal and mechamical sensitivity was determined in accordance with EEC Method A14. The test item is not explosive.
Key value for chemical safety assessment
- Explosiveness:
- non explosive
Additional information
Justification for classification or non-classification
The test item is not explosive according to EEC Method A14.
Therefore, in accordance with Regulation (EC) No. 1272/2008 section 2.1.2, this substance shall not be classified as explosive.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
