Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

∙ General information:

Immediately remove any clothing soiled by the product.

Take affected persons out into the fresh air.

Personal protection for the First Aider.

Do not leave affected persons unattended.

∙ After inhalation:

Keep quiet

Supply fresh air; consult doctor in case of complaints.

∙ After skin contact:

Immediately remove any clothing soiled by the product.

Immediately wash skin with plenty of water and soap and rinse thoroughly.

If skin irritation continues, consult a doctor.

∙ After eye contact:

Rinse opened eye for several minutes under running water. Then consult a doctor.

Protect unharmed eye.

∙ After swallowing: Call for a doctor immediately.

Most important symptoms and effects, both acute and delayed

The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in

section 11

Indication of any immediate medical attention and special treatment needed

No further relevant information available.

Fire-fighting measures

Extinguishing media

∙ Suitable extinguishing agents:

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

∙ For safety reasons unsuitable extinguishing agents:

Water with full jet

Special hazards arising from the substance or mixture

In case of fire, the following can be released:

Carbon monoxide (CO)

Under certain fire conditions, traces of other toxic gases cannot be excluded.

Advice for firefighters

∙ Protective equipment:

Wear self-contained respiratory protective device.

Do not inhale explosion gases or combustion gases.

Wear protective suit

∙ Additional information

Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.

Collect contaminated fire fighting water separately. It must not enter the sewage system.

Cool exposed containers to the heat by pulverizing water.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Avoid substance contact.

Wear protective equipment. Keep unprotected persons away.

Ensure adequate ventilation

Ensure supply of fresh air in enclosed rooms.

Environmental precautions:

Do not allow product to reach sewage system or any water course.

Do not allow to enter sewers/ surface or ground water.

Inform respective authorities in case of seepage into water course or sewage system.

Methods and material for containment and cleaning up:

Dyke up, pump or absorb liquid components with an inert liquid-binding material.

Ensure adequate ventilation.

Do not use sawdust

Dispose of the material collected according to regulations.

Reference to other sections

See Section 7 for information on safe handling.

See Section 8 for information on personal protection equipment.

See Section 13 for disposal information.

Handling and storage

Precautions for safe handling

Ensure good ventilation/exhaustion at the workplace.

Open and handle receptacle with care.

∙ Information about fire - and explosion protection:

Keep ignition sources away - Do not smoke.

Emergency cooling must be available in case of nearby fire.

Conditions for safe storage, including any incompatibilities

∙ Storage:

∙ Requirements to be met by storerooms and receptacles: No special requirements.

∙ Information about storage in one common storage facility: Store away from foodstuffs.

∙ Further information about storage conditions: Store in cool, dry conditions in well sealed receptacles.

Specific end use(s) No further relevant information available.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Additional information about design of technical facilities: No further data; see item 7.

Control parameters

∙ Ingredients with limit values that require monitoring at the workplace:

The product does not contain any relevant quantities of materials with critical values that have to be monitored at

the workplace.

∙ Additional information: The lists valid during the making were used as basis.

Exposure controls

∙ Personal protective equipment:

∙ General protective and hygienic measures:

The usual precautionary measures for handling chemicals should be followed, using protective eyewear and

protective clothing

Avoid contact with the eyes and skin.

Immediately remove all soiled and contaminated clothing

Wash hands before breaks and at the end of work.

Keep away from foodstuffs, beverages and feed.

Avoid contact with the skin.

∙ Respiratory protection:

If vapor exposure cannot be avoided, wear a gas mask with cartridge ABEK according to the standard IN 14387

or equivalent

∙ Protection of hands:

Protective gloves

Avoid direct contact with the chemical/ the product/ the preparation by organisational measures.

Check protective gloves prior to each use for their proper condition.

Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.

Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the

chemical mixture.

∙ Material of gloves

The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.

∙ Penetration time of glove material

The exact break through time has to be found out by the manufacturer of the protective gloves and has to be


∙ Eye protection:

Safety glasses

∙ Body protection: Protective work clothing

Stability and reactivity

Reactivity No further relevant information available.

Chemical stability

∙ Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.

Possibility of hazardous reactions

Reacts with strong oxidising agents.

Reacts with strong alkali.

Conditions to avoid No further relevant information available.

Incompatible materials: No further relevant information available.

Hazardous decomposition products: No dangerous decomposition products known.

Disposal considerations

Waste treatment methods

∙ Recommendation

Must not be disposed together with household garbage. Do not allow product to reach sewage system.

Hand over to hazardous waste disposers.

Must be specially treated adhering to official regulations.

∙ Uncleaned packaging:

∙ Recommendation: Disposal must be made according to official regulations.