Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove patient to fresh air.
Emergency measure - Eyes: Flush with water for 15 minutes.
Emergency measure - Skin: Wash thoroughly with soap and water.
Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Dry chemical, carbon dioxide, foam

Product arising from burning: Products of combustion may contain carbon oxides and noxious
fumes.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards.


Absorb spillages with a suitable inert material (eg. sand or
soil). Carefully transfer the spillage to waste containers,
or use a sealed industrial vacuum machine. Containers filled
with waste material must be labelled in the same way as the
original substance containers.


Clean the spillage area with detergent. Do not discharge to
drain.


Dispose of waste material in accordance with local
regulations by incineration.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls may be necessary to reduce exposure to
the substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard prEN374

Chemical protective clothing to Standard EN368

Eye protection to Standard prEN166.


Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling exposure,
be suitable for the purpose, and conform to the appropriate
international or national standards, such as a dust mask
conforming to EN149 FFP1.


These measures should be regarded as a minimum.

Storage: Store in tightly closed containers in a cool, dark place.

Packaging of the substance and or preparation: Steel drum or pail. Plastic or glass would be acceptable for
small quantities.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: See below
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.


IMO: 9, Miscellaneous, ID No. UN3082 - Marine Pollutant.

Also DOT >= 119 Gallons

IATA/ICAO: Not regulated. Also DOT < 119 Gallons.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None Reported.

Chemical reaction with water: None Reported.

Dust explosion: Not applicable.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have revealed no hazardous health
properties of the substance.


The substance is acutely very toxic to Daphnia and has a
high Pow, however no chemical treatment is practicable to
neutralise the hazardous environmental properties.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon
oxides) could be formed.

Industry - Possibility of destruction - water purification: Not recommended.

Public at large - Possibility of recovery/recycling: The substance will not enter the public domain.