Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remvove subject to ventilated fresh air and seek immediate
medical attention.
Emergency measure - Eyes: Immediately flush with water for at least 15 minutes. Seek
medical attention.
Emergency measure - Skin: Remove the substance from the skin with dry cloth or towel
and wash the exposed area with detergent.
Emergency measure - Ingestion: Rinse mouth out with water provided that the person is
conscious. Never give anything by mouth to an unconscious
person. Seek medical attention immediately.

Fire-fighting measures

Recommended extinguishing agent: Foam, dry chemical or carbon dioxide.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg oxides of carbon and
nitrogen and fluorine and silicon containing compounds)
however there is no experimental evidence to support the
anticipated combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self contained breathing
apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from the immediate vicinity. Wear the
appropriate personal protective equipment conforming to the
relevant national or international standards. Contain the
spill or leak. Scrape up the spilt material using cardboard
or a rag and transfer to waste container.


Clean the area of the spillage firstly with ethanol and then
again with a detergent.


Dispose of waste material in accordance with local
regulations.

Handling and storage

Handling: The substance should be stored, handled and used in conditions of good industrial hygiene and in conformity with any local regulations in order to avoid exposure. Storage: Keep containers tightly closed when not in use. Store in refrigerated conditions. Keep away from heat, sparks and flame. Packaging of the substance and or preparation: Plastic bottle or inner laminated cans in 1-20 L sizes.

Transport information

Land transport (ADR/RID)

UN number:
Not classified
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified
Remarks
Transport code: Not UN classified.
Transport: Transport under refrigeration. Plastic bottle or inner laminated cans in 1-20 L sizes.

IMO classification and class - none.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering controls are necessary to reduce exposure to the
substance.

When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.
Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard EN374

Chemical reistant clothing to Standard EN368

Eye protection to Standard EN166

The standards mentioned above should be regarded as a
minimum.

Stability and reactivity

Danger other than fire: None reported.

Chemical reaction with water: None.

Dust explosion: Not applicable as the substance is not a dusty solid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery from minor spillages or accidental discharge is not
economically or technically feasible and such waste
material will be disposed of by incineration.

Industry - Possibility of neutralisation: None.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of the substance may be
disposed of by landfill at an authorised tip in accordance
with local regulations.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controllled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious gases (eg carbon and
nitrogen oxides and fluorine and silicon containing

compounds) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment. However,
adverse effects on sewage treatment systems would be

unlikely.

Public at large - Possibility of recovery/recycling: N/A

Public at large - Possibility of neutralisation: N/A

Public at large - Possibility of destruction: controlled discharge: N/A

Public at large - Possibility of destruction - incineration: N/A

Public at large - Possibility of destruction - water purification: N/A

Public at large - Possibility of destruction - others: N/A