Registration Dossier

Administrative data

First-aid measures

General information:
- Remove clothing where dust collected.
- Adhere to personal protective measures when giving first aid.

After inhalation:
- Remove the casualty into fresh air and keep him calm.
- Ensure supply of fresh air.
- Take medical treatment.

After contact with skin:
- In case of contact with skin, clean with soap and water.
- Take for medical treatment.

After contact with eyes:
- Rinse the affected eye immediately with plenty of water at the same time keep the unaffected eye well protected.
- Summon a doctor immediately.

After ingestion:
- If swallowed do not induce vomiting, seek medical advice and show safety datasheet or label.
- Rinse out mouth and give plenty of water to drink.

Fire-fighting measures

Suitable extinguishing media: foam
Extinguishing media that must not be used for safety reasons: gaseous extinguishing media; water.

Special hazards arising from the substance or mixture:
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO), phosphorus oxide (eg Phosphorus pentoxide), carbon dioxide (CO2).

Advice for firefighters - Special protective equipment for firefighting:
- Use self-contained breathing apparatus
- Do not inhale explosion and/or combustion gases
- Wear full protective suit
- In case of fire, use acid-resistant equipment / personal protective equipment.

Further information: Fire residues and contaminated firefighting water must be disposed of in accordance with the local registrations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
- Do not inhale dust
- Avoid contact with skin and eyes
- Self-contained breathing apparatus
- Wear personal protective equipment. Unprotected persons must be kept away.

Environmental precautions:
- Do not discharge into the drains/surface waters/groundwater.

Methods and material for containment and cleaning up:
- Take up mechanically
- Dispose of absorbed material in accordance with the regulations
- Avoid raising dust.

Handling and storage

Advice on safe handling:
- Provide suitable exhaust ventilation at processing machines
- Use only in well ventilated areas
- Avoid the formation and deposition of dust
- Take precautionary measures against electrostatic loading.

Hygiene measures:
- Wash hands before breaks and after work
- At work do not eat, drink, smoke or take drugs.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures:
- Do not inhale dust.
- Avoid contact with eyes and skin.

Respiratory protection: Full mask with dust filter P3

Hand protection:
- Gloves (acid-resistant)
- Nitrile rubber gloves
- Neoprene gloves

Eye protection: Tightly fitting safety glasses and in case of severe danger add face protection (shield).

Body protection: Acid-resistant protective clothing

Stability and reactivity

Chemical stability: Stable
Possibility of hazardous reactions: Risk of dust explosions
Conditions to avaoid: Temperatures exceeding thermal stability of the masterbatch. High concentrations of powders. Electrostatic charges.
Incompatible materials: none
Hazardous decomposition products: Phosphorus oxides (e.g. P2O5)

Disposal considerations

Waste treatment methods:
Product: Disposal in an incineration plant in accordance with the regulations of the local authorities.
Uncleaned packaging: Packaging that cannot be cleaned should be disposed of as product waste.