Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 950-463-6 | CAS number: -
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- relative density
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2016
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with generally accepted scientific standards and described in sufficient detail
- Principles of method if other than guideline:
- Density:
An Anton Paar DMA 4500 M Densimeter was used to measure the density of the submitted samples. The sample was analyzed three times.
These measurements were obtained in accordance with SIOP 6.22 which is based on ASTM D-4052 and CTM 0768. - GLP compliance:
- no
- Type of method:
- other: Anton Paar DMA 4500 M Densimeter
- Type:
- density
- Density:
- 0.939 g/cm³
- Temp.:
- 20.01 °C
- Remarks on result:
- other: Average of 3 samples.
- Key result
- Type:
- relative density
- Density:
- 0.941
- Temp.:
- 20.01 °C
- Remarks on result:
- other: Average of 3 samples. Value not provided in report table, however was calculated.
- Conclusions:
- An Anton Paar DMA 4500 M Densimeter was used to measure the density of the submitted samples. The sample was analyzed three times. The average density of the test material was 0.93929 g/cm^3.
- Executive summary:
An Anton Paar DMA 4500 M Densimeter was used to measure the density of the submitted samples. The sample was analyzed three times. The average density of the test material was 0.93929 g/cm3.
Reference
Table 1. Density Results
Sample Name |
Density (g/cm³) |
Specific Gravity |
Density Temperature (°C) |
8624816-1 |
0.93929 |
0.94099 |
20.01 |
8624816-2 |
0.93930 |
0.94099 |
20.01 |
8624816-3 |
0.93929 |
0.94098 |
20.01 |
Average |
0.93929 |
|
|
Standard Deviation |
0.00001 |
|
|
Description of key information
An Anton Paar DMA 4500 M Densimeter was used to measure the density of the submitted samples. The sample was analyzed three times. The average density of the test material was 0.93929 g/cm3.
Key value for chemical safety assessment
- Relative density at 20C:
- 0.941
Additional information
An Anton Paar DMA 4500 M Densimeter was used to measure the density of the submitted samples. The sample was analyzed three times. The average density of the test material was 0.93929 g/cm3.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
