Registration Dossier

Physical & Chemical properties

Flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
17 Dec 2018 to 25 Jan 2019
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to
Guideline:
UN Manual of Tests and Criteria: Test N.1 (Test method for readily combustible solids)
Version / remarks:
2015
Deviations:
no
GLP compliance:
yes (incl. certificate)
Specific details on test material used for the study:
Physical Description: Off-white powder (determined by Charles River Den Bosch)
Purity/Composition: 99.77%, assumed 100% for testing
Storage Conditions: At room temperature protected from light desiccated
Key result
Test procedure:
burning rate test: preliminary screening test
Remarks on result:
substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
Interpretation of results:
not classified based on GHS criteria
Conclusions:
The preliminary screening test was performed for the determination of the flammability of Esacure 1001 M.

No propagation of combustion of the test item along 200 mm length of the pile within 2 minutes was observed. According to the guidelines, performance of the burning rate test is not required. Based on the results obtained, the test item is considered ‘not flammable’.
Executive summary:

In this guideline (UN.1) study, conducted with GLP certification, the test substance was shown to not be classified as flammable under CLP.

Description of key information

Study conducted to recognised testing guidelines with GLP certification.

Key value for chemical safety assessment

Flammability:
not classified

Additional information

Justification for classification or non-classification

No propagation of combustion of the test item along 200 mm length of the pile within 2 minutes was observed. According to the guidelines, performance of the burning rate test is not required. Based on the results obtained, the test item is considered ‘not flammable’.