Registration Dossier

Administrative data

First-aid measures

General advice: First aider needs to protect himself. Seek medical assistance if discomfort continues
If inhaled: Move to fresh air.
In case of skin contact: Wash off immediately with plenty of water.
In case of eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
If swallowed : If swallowed, do not induce vomiting. seek medical advice immediately.

Fire-fighting measures

Suitable extinguishing media: Water spray jet, Dry powder, Carbon dioxide (CO2), Alcohol-resistant foam

Unsuitable extinguishing media: High volume water jet

Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus.

Further information: In the event of fire and/or explosion do not breathe fumes. Keep people away from and upwind of spill/leak.
Use extinguishing measures that are appropriate to local cir-cumstances and the surrounding environment. Please observe escape and rescue routes!

Accidental release measures

Environmental precautions : Do not allow entry to drains,water courses or soil. Contain contaminated water/firefighting water.
Methods for cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal. Containers in which spilt substance has been collected must be adequately labelled
Dispose of absorbed material in accordance with the regulations.

Handling and storage

Advice on safe handling:
Handle in accordance with good industrial hygiene and safety practice. The product should be handled under strictly controlled conditions as defined in Article 18 (4) REACH.
Avoid contact of the substance.

Advice on protection against fire and explosion:
Observe the general rules of industrial fire protection.

Hygiene measures:
Do not eat, drink or smoke at work place. Remove soiled or soaked clothing immediately and clean thoroughly before using again.
Garments that cannot be cleaned must be destroyed (burnt). Keep away from foodstuffs and beverages. Clean hands and face during work intervals and after work
Follow the skin protection plan.

Conditions for safe storage, including any incompatibilities
The substance is stored in a closed tank/vessel.

Transport information

Land transport (ADR/RID)

UN number:
Not applicable, onsite intermediate
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not applicable, onsite intermediate
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not applicable, onsite intermediate
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not applicable, onsite intermediate
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Product should be worked up in closed equipment. Exposure is unlikely.

Personal protective equipment
At the workplace the basic set of PPE is mandatory (e.g. Safety glasses, safety shoes, working suit).
In case of possible exposition, eg. during sampling or in accidental case additional PPE should be worn.

Eye protection:
Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face shield.)

Hand protection
Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work.
The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Suitable:
Butyl rubber gloves.
Nitrile rubber gloves.
Gloves must be inspected prior to use. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Gloves must be rinsed thoroughly after use.

Skin and body protection
Working suit. In case of major accident, a chemical protection suit may be required.

Respiratory protection:
Normally not required, if handled properly. If exposure to fumes can not be excluded (e.g. in accidential situations), wear respiratory protection. Short term only.
Respirator with combination filter for vapour/particulate (EN 14387). Respirator with filter type ABEK.

Stability and reactivity

The substance is stable ub to 400°C. Under normal conditions of use, no dangerous reactions are known.

Disposal considerations

Product: Dispose of contents/ container to an approved waste disposal plant. Observe local authority regulations

Contaminated packaging: Not relevant.