Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

If inhaled: Immediately call a POISON CENTER or doctor/physician. Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If on skin: Immediately call a POISON CENTER or doctor/physician. Remove/Take off immediately all contaminated clothing. Immediately wash the skin. Gently wash with plenty of soap and water.
If in eyes: Immediately call a POISON CENTER or doctor/physician. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If swallowed: Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Do NOT induce vomiting.
Personal precautions: Wear proper personal protective equipment

Fire-fighting measures

Suitable extinguishing media: Foam fire-extinguisher, Carbon dioxide, Dry chemical powder
Inappropriate extinguishing media: Water
Specific hazards: During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Product combustible at elevated
temperatures. Heating, spark and flame may cause a fire.
Special extinguishing procedures: Remove container from fire area if safe to do so. Declare off-limits to non-participants around fire area.
Special protective action for fire-fighters: Responders should wear self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective clothing.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Immediately isolate the area at suitable distance in all directions. Declare off-limits to non-participants around fire area. Use proper personal protective equipment to prevent any contamination of skin, eyes and clothing. Ventilate sufficiently in case of confined space. Avoid contact and warn / evacuate occupants. Keep public away. If strewed on water, keep ships away. Eliminate sources of ignition. Advice local authorities if in doubt.
Environmental precautions: Avoid release to the environment. Prevent liquid from entering sewers, watercourses or low areas. Restrict liquid from spreading over the ground with sand or earth. Restrict liquid from spreading over water surface with oil boom if possible.
Method and materials for containment and cleaning up: Recover large spills by proper method. Recover small spills with a suitable absorbent. Consult an expert on disposal regulations. (For solid) Sweep and collect the spilled solid in a container and storage until disposal. Flush the residue with plenty of water to avoid the flushing water. (For liquid) Recover the spilled liquid with an inactive absorbent (ex. dry sand, earth) and put into chemical waste container.
Methods for containment: Shut off the source if possible to do so without undue hazard. Prevent liquid from entering sewers, watercourses or low areas.
Preventions of secondary Disaster: Promptly remove all ignition sources. Ban smoking, sparking and flaming in the vicinity of the area.

Handling and storage

Precautions for safe handling
Technical measure: use proper personal protective equipment.
Local/general ventilation: use adequate local/general ventilation equipment.
Handling precautions: Store in a cool, dry, well-ventilated place away from incompatible materials. Keep containers and apparatus tightly closed. Keep away from eyes, skin or clothing; wash thoroughly after handling. Containers will retain product residue and vapors after being emptied. Always obey hazard warnings and handle empty containers as though they were full. Do not breathe dust/fume/gas/mist/vapours/spray.
Conditions for safe storage, including any incompatibilities
Technical measure: Equipment of necessary lighting, illumination and ventilation is installed to store dangerous goods in a storage or treat. Comply with the regulations of the Fire Service Law. Avoid direct sunlight and fire, to store well-ventilated place.
Appropriate safe storage Conditions: Store locked up.
Safe container wrapping Material: There are no wrapping and regulation of a container, but it's put in something which is not damaged in direct vent system.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
None
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
None
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
None
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
None
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls: Facilities storing or utilizing this material should be equipped with an eye wash facility and a safety shower. Use mechanical ventilation to keep airborne and to reduce dust concentration.
Individual protection measures, such as personal protective equipment (PPE)
Respiratory protection: For dust generated by use condition, wear a NIOSH or European Standard EN 149 approved respirator appropriate for emission levels. Appropriate respirators may be full or half mask air purifying cartridge respirators equipped for organic dust, or self-contained breathing apparatus.
Hand protection: Wear appropriate protective gloves (rubber gloves with gauntlets).
Eye protection: Wear proper eye protection (chemical goggles as a minimum).
Protective clothing: Wear acid-resistant slicker suit with rubber apron, rubber with pants outside and rubber gloves with gauntlets.
Sanitary measures: When using the product, not eating or smoking. Wash hands thoroughly after handling. Wear protective equipment as noted under PERSONAL PROTECTION bellow, including a self-contained breathing apparatus. For small liquid mop up and dispose of in DOT-approved waste containers. For large liquid, put into such waste containers. Keep material out of sewers, storm drains, surface waters and soil.

Stability and reactivity

Stability: Stable under normal temperatures and pressures.
Possibility of hazardous reactions: React with strong oxidizing agents
Conditions to avoid: Heat, Spark, Open flame, Static discharge
Incompatible materials: Strong oxidizing agents
Hazardous decomposition products: Carbon monoxide and carbon dioxide.

Disposal considerations

Disposal methods: Examine possibilities for re-utilization. Package product wastes. Close and label the waste receptacles and, likewise, any un-cleaned empty containers. Dispose of them at a suitable waste incineration plant in accordance with the official regulations. Where large quantities are concerned, consult the supplier. When un-cleaned empty containers are passed on, the recipient must be warned of any possible hazard that may be caused by residues.
Contaminated packaging: Dispose of contents/container in accordance with local/regional/national/international regulation. When dispose of a container, remove contents.