Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
· General information: Immediately remove any clothing soiled by the product.
· After inhalation:
Supply fresh air or oxygen; call for doctor.
In case of unconsciousness place patient stably in side positionfor transportation.
· Afterskin contact:
Seek immediate medical advice.
Immediately rinse with water.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing:
Seek medical treatment.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Rinse out mouth and then drink plenty ofwater.

Most important symptoms and effects, both acute and delayed No further relevant information available.

Indication of any immediate medical attention and special treatment needed
No further relevant information available.

Fire-fighting measures

Suitable extinguishing media: water spray, dry powder, foam, carbon dioxide.

Special hazards arising from the substance or mixture
Nitrogen oxides and carbon oxides can be released in case of fire. Under certain conditions in case of fire other hazardous combustion products may be generated.

Advice for fire-fighters
Special protective equipment: Wear self-contained breathing apparatus and chemical-protective clothing.

Additional information:
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
Collect contaminated fire fighting water separately. It must not enter the sewage system.

Accidental release measures

Methods and material for containment and cleaning up:
For small amounts: Pick up with absorbent material (e.g. sand, sawdust, general-purpose binder).
For large amounts: Pump off product.
Cleaning operations should be carried out only while wearing breathing apparatus. Collect waste in suitable containers, which can be labeled and sealed. To clean the floor and all objects contaminated by this material, use plenty of water.

Handling and storage

Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.

Protection against fire and explosion:
The product is combustible. Prevent electrostatic charge - sources of ignition should be kept well clear - fire extinguishers should be kept handy.

Conditions for safe storage, including any incompatibilities
Do not store together with acids and oxidants.

Further information on storage conditions:
Store in cool, dry place in tightly closed receptacles.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN2735
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN2735
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN2735
Shipping information
Proper shipping name and description:
2735 Amines, liquid, corrosive, N.O.S. (N-(2-Hydroxypropyl)imidazole)
Chemical name:
N-(2-Hydroxypropyl)imidazole
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN2735
Shipping information
Proper shipping name and description:
2735 Amines, liquid, corrosive, N.O.S. (N-(2-Hydroxypropyl)imidazole)
Chemical name:
N-(2-Hydroxypropyl)imidazole
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Personal protective equipment:

General protective and hygienic measures:
Keep away fromfoodstuffs, beverages andfeed.
lmmediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Pregnant women should strictly avoid inhalation or skin contact.
Do not eat, drink, smoke or sniffwhile working.

Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or
longer exposure use self-contained respiratory protective device.

Protection of hands:
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Protection gloves
Only use chemical-protective gloves with CE-labelling of category III.
Check the permeability prior to each anewed use of the glove.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also onfurther marks of quality
and varies from manufacturer to manufacturer.
· Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Not suitable are gloves made ofthefollowing materials:
Leather gloves
Strang material gloves

Eye protection:
Tightly sealed goggles

Body protection: Protective work clothing

Stability and reactivity

Reactivity No further relevant information available.

Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.

Possibility of hazardous reactions Reacts with acids.

Conditions to avoid No further relevant information available.

Incompatible materials: No further relevant information available.

Hazardous decomposition products: No dangerous decomposition products known.

Disposal considerations

Waste treatment methods
· Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must be specially treated adhering to official regulations.

European waste catalogue:
HP 8 Corrosive

· Uncleaned packaging:
· Recommendation:
Empty contaminated packagings thoroughly. They may be recycled after thorough and proper cleaning.