Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: - | CAS number: -
Surface tension
Administrative data
Link to relevant study record(s)
- Endpoint:
- surface tension
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 22 February 2018 to 30 October 2018
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.5 (Surface Tension)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- plate method
- Specific details on test material used for the study:
- Physical Form: Amber liquid
Stability: Stable at room temperature - Key result
- Surface tension:
- 53.2 mN/m
- Temp.:
- 25 °C
- Remarks on result:
- other: The mean concentration of the test solutions measured was < 10 mg/L for m/z 369 and < 5 mg/L for m/z 251 and < 1 mg/L for m/z 281.
- Conclusions:
- For the Test material a surface tension value of 53.2 mN/m at 25.0 °C has been reported.
The mean concentration of the test solutions measured was < 10 mg/L for m/z 369 and < 5 mg/L for m/z 251 and < 1 mg/L for m/z 281. - Executive summary:
In a study performed to the standardised guideline EU Test Method A.5 under GLP conditions, the surface tension of the test material has been determined to be 53.2 mM/m.
Reference
From the analysis performed for m/z 369, m/z 351 and m/z 281 all undiluted surface tension test solutions were determined to have concentrations below the limit of quantitation for the method.
The mean concentration of the test solutions measured was < 10 mg/L for m/z 369 and < 5 mg/L for m/z 251 and < 1 mg/L for m/z 281.
Description of key information
In a study performed to the standardised guideline EU Test Method A.5 under GLP conditions, the surface tension of the test material has been determined to be 53.2 mM/m.
Key value for chemical safety assessment
- Surface tension:
- 53.2
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
