Registration Dossier

Administrative data

First-aid measures

- Following inhalation:
* Move the affected person away from the contaminated area and into the fresh air.
* If irritation persists, consult a physician

- Following skin contact:
* Remove by wiping.
* Remove all contaminated clothing and footwear.
* Rinse immediately with plenty of water.
* If case of redness or irritation, call a doctor

- Following eye contact:
* Rinse immediately and thoroughly, pulling the eyelids well away from the eye (15 minutes minimum).
* Remove contact lenses, if present and easy to do. Continue rinsing.
* Always consult an eye specialist, even if there are no immediate symptoms

- Following ingestion:
* Do not induce vomiting
* Ask for medical advice. If possible show him this sheet. Failing this, show him the packaging or label.

- Most important symptoms and effects:
* Suspected of causing genetic defects.
* May cause an allergic skin reaction
* Causes serious eye damage

Fire-fighting measures

- Suitable extinguishing media:
Water spray. Powder. Foam.

- Unsuitable extinguishing media:
High volume water jet. Carbon dioxide (CO2)

- Special hazards arising from the substance or mixture:
* Avoid raising powdered material due to explosion hazard.
* Not classified as flammable according to EEC criteria, but may present a risk in the event of a fire
* During combustion: Toxic fumes may be released.
* Thermal decomposition generates : Carbon oxides (CO, CO2). Nitrogen oxides. Various hydrocarbon fragments.

- Advice for fire fighter:
Contain the extinguishing fluids by bunding. Do not dispose of fire-fighting water in the environment.
Do not attempt to take action without suitable protective equipment (Self-contained breathing apparatus. Complete protective clothing)

Accidental release measures

- Personal precautions:
Avoid contact with skin and eyes. Do not breathe dust. Avoid dust formation

- Protective equipment and emergency procedures:
Do not attempt to take action without suitable protective equipment

- Environmental precautions:
Contain the spilled material by bunding. Do not discharge the product into the environment.

- Methods and material for containment and cleaning up:
Minimize generation of dust. Sweep up or vacuum up the product.Wash non-recoverable remainder with large amounts of water. Recover the cleaning water for later disposal. Dispose of materials or solid residues at an authorized site.


Handling and storage

- Precautions for safe handling:
* Ensure good ventilation of the work station.
* Avoid any direct contact with the product.
* Avoid raising powdered material due to explosion hazard.
* Do not breathe dust.
* Avoid any direct contact with the product.
* Prevent unauthorised access.
* Take all necessary technical measures to avoid or minimize the release of the product on the workplace.
* Do not expose pregnant or breastfeeding women.
* Obtain special instructions before use.
* Do not handle until all safety precautions have been read and understood.
* Limit quantities of product at the minimum necessary for handling and limit the number of exposed workers.
* Do not drink, eat or smoke in the workplace. Always wash hands after handling the product.



- Conditions for safe storage, including any incompatibilities:
Keep container tightly closed. Store in a cool and dry place, in orginal container.
Incompatible materials: None to our knowledge.


Transport information

Land transport (ADR/RID)

UN number:
Not applicable
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not applicable
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not applicable
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not applicable
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- Technical protection measures :
Ensure good ventilation of the work station
Safety shower
Eye fountain

- Organisational protection measures:
Handle in accordance with good industrial hygiene and safety practice

- Hand protection :
Impermeable protective gloves.
Breakthrough time : refer to the recommendations of the supplier
The protective gloves to be used must comply with the specifications of the regulation 2016/425 and the resultant standard EN 374

- Body protection :
Protective clothing

- Eye protection :
Sealed safety goggles. (EN 166)

- Respiratory protection
Suitable respiratory mask (P2)

Stability and reactivity

- Reactivity :
To our knowledge, this product does not present any particular risk, provided it is handled in accordance with good occupational hygiene and safety practice.

- Chemical stability :
Stable at ambient temperature and under normal conditions of use.

- Possibility of hazardous reactions :
Dust explosion hazard.

- Conditions to avoid :
Humidity

- Incompatible materials :
None to our knowledge

- Hazardous decomposition products :
No hazardous decomposition products if stored and handled as prescribed/indicated.


Disposal considerations

Dirty containers cannot be handled as normal waste.
Dispose of in accordance with relevant local regulations.
Destroy at an authorised site.