Registration Dossier

Administrative data

First-aid measures

Inhalation: Move victim to fresh air. Call emergency medical service. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Keep victim warm and quiet. Treat symptomatically and supportively. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves.

Skin contact: Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin with running water for at least 20 minutes. Treat symptomatically and supportively. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves.

Eye contact: Move victim to fresh air. Check for and remove any contact lenses. In case of contact with substance, immediately flush eyes with running water for at least 20 minutes. Keep victim warm and quiet. Treat symptomatically and supportively. Effects of exposure to substance may be delayed. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves.

Ingestion: If a person vomits place them in the recovery position so that vomit will not reenter the mouth and throat. Rinse mouth. Keep victim warm and quiet. Loosen tight clothing such as a collar, tie, belt or waistband. If swallowed, seek medical advice immediately and show the container or label. Treat symptomatically and supportively. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. Effects of exposure (ingestion) to substance may be delayed.

Symptoms/effects:
- Acute: No data available
- Delayed: No data available

Immediate medical attention: If breathing has stopped, perform artificial respiration. Use first aid treatment according to the nature of the injury. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves.

Fire-fighting measures

Suitable extinguishing media: Dry chemical, CO2 , water spray, or alcohol-resistant foam. Consult with local fire authorities before attempting large scale fire fighting operations.

Specific hazards arising from the chemical
Hazardous combustion products: These products include: Carbon oxides, Sulfur oxides
Other specific hazards: Closed containers may explode from heat of a fire.

Special precautions for fire-fighters: Not available
Special protective equipment for fire-fighters: Structural fire fighters' protective clothing provides limited protection in fire situations only; it may not be effective in spill situations.

Accidental release measures

Personal precautions: Do not touch damaged containers or spilled material unless wearing appropriate protective clothing (Section 8).
Personal protective equipment: Wear protective clothing, gloves and eye protection.
Emergency procedures: In case of a spill and/or a leak, always shut off any sources of ignition, ventilate the area, and excercise caution.

Methods and materials for containment and cleaning up: Dike far ahead of liquid spill for later disposal.
Environmental precautions: Prevent entry into sewers, basements or confined areas.

Handling and storage

Precautions for safe handling: Good general ventilation should be sufficient to control airborne levels. Normal measures for preventive fire protection. Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.
Conditions for safe storage: Keep container tightly closed in a dry and well-ventilated place.
Storage incompatibilities: Combustible substances, Store away from oxidizing agents

Transport information

Land transport (ADR/RID)

UN number:
Non-hazardous for transportation.
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Non-hazardous for transportation.
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Non-hazardous for transportation.
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Non-hazardous for transportation.
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure limits: Please refer to the Chemical Safety Report and/or the Annex to the Safety Data Sheet for information on DNELs.

Appropriate engineering controls: Good general ventilation providing at least 3 ACH is considered sufficient to control the air concentration. Eyewash fountains should be provided in areas where there is any possibility that workers could be exposed to the substance. Follow safe industrial engineering/laboratory practices when handling any chemical. Ensure appropriate level of containment for the emission source as specified in the exposure scenario.

Personal protective equipment:
- Respiratory protection: Use respiratory protection if indicated in the exposure scenarios included in the Chemical Safety Report and/or attached in the Annex to the Safety Data Sheet. Respiratory protection with an assigned protection factor of 10 or higher and Type A filter is considered suitable. Make sure to use an approved respirator or equivalent in accordance with EN529.
- Hand protection: When direct contact with substance is expected, wear protective gloves tested to EN374 with breakthrough time of 8 hours (thickness at least 0.5 mm). Suitable materials: neoprene, PVC. Unsuitable materials: nitrile, butyl, PVA, Viton, SilverShield.
- Eye protection: Tight fitting goggles or face shield.
- Skin and body protection: Full skin coverage required using coverall or lab coat.

Stability and reactivity

Reactivity: Not Available.
Chemical Stability: Stable under recommended storage conditions (See Section 7).
Possibility of Hazardous Reactions: No hazardous reactivity has been reported.
Conditions to avoid: Avoid excessive heat and light.
Incompatible materials: Strong oxidizing agents.
Hazardous Decomposition Products: No data available.

Disposal considerations

Disposal of product: Recycle to process if possible. It is the generator's responsibility to comply with Federal, State and Local rules and regulations. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. This section is intended to provide assistance but does not replace these laws, nor does compliance in accordance with this section ensure regulatory compliance according to the law. US EPA guidelines for Identification and Listing of Hazardous Waste are listed in 40 CFR Parts 261.
Disposal of container: Dispose of as unused product.
Other considerations: Observe all federal, state and local regulations when disposing of the substance.