Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-984-6 | CAS number: -
Table 1 shows the determined volume of the pycnometer. The results of the test for the determination of the density of the test item are given in Table 2.
The individual measurements were obtained with a deviation of≤ 0.01 g/cm3. According to the guideline, the density of the test item is given as the mean value.
Table 1 Volume of the Pycnometer
Mass empty pycnometer (A)
Mass pycnometer with water (B)
Volume of the pycnometer
Table 2 Density of the Test Item
Mass pycnometer with test item (C)
A pycnometer was used for the determination of the density and relative density of Setalux 7002 BX-55.
The density of the test item at 20ºC was 0.965 g/cm3 (0.965x103 kg/m3). The relative density was 0.965.
A pycnometer was used for the determination of the density and relative density of Setalux 7002 BX-55. The density of the test item at 20ºC was 0.965 g/cm3 (0.965x103 kg/m3). The relative density was 0.965.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Close Do not show this message again