Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. If breathing has stopped, apply
artificial respiration. If breathing is difficult, give
oxygen provided a qualified operator is available. Seek
medical attention.
Emergency measure - Eyes: Immediatesly flush with running water, continuing for at
least 15 minutes, lifting eyelids periodically to remove
contamination. Seek immediate medical attention.
Emergency measure - Skin: Wash affected area with soap and water, then flush with
large quantities of water. Remove contaminated clothing and
launder before re-use. Seek medical attention for any
irritation or any other symptoms.
Emergency measure - Ingestion: If conscious, rinse mouth out with water, then give two to
four glasses of water or milk. Seek immediate medical
attention.

Fire-fighting measures

Recommended extinguishing agent: Use carbon dioxide, dry chemical or alcohol foam (polar
solvent foam).

Product arising from burning: Combustion would be expected to produce carbon monoxide,
carbon dioxide and oxides of nitrogen.

Product determined by test: N

Protective equipment: Wear NIOSH approved self-contained positive pressure
breathing apparatus and protective clothing to prevent
contact with skin and eyes.

Accidental release measures

Emergency measures in case of spillage: Always wear recommended personal protective equipment.
Eliminate sources of ignition. Provide ventilation to spill
area. Absorb with inert absorbent and place in a closed,
approved, labelled waste container. For large spills, dike
up with inert material and pump into same container. Do not
allow pump to overheat. Do not allow to enter sewers to
waterways.

Handling and storage

Handling: Avoid contact with skin, eyes and clothing. Always wear
recommended personal protective equipment. Under normal
circumstances, rubber gloves and full work clothing are
adequate along with chemical safety glasses or goggles. If
contact with liquid is possible, wear impervious clothing
(overall). Showering after work is recommended. Use with
adequate ventilation; use local ventilation at product
handling and transfer points. Ground material during liquid
transfer to avoid static build up.

Storage: Keep away from sources of ignition. Store in a cool, dry,
well ventilated area away from heat, strong oxidizers and
acids (temperature <35 'C). Keep containers upright and
tightly sealed. Protect from physical damage.

Packaging of the substance and or preparation: The substance is stored in 50 to 200 kg high density
polyethylene lined fibre drums.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: US DOT hazard: Class 3, Flammable liquid, PG III (UN 1993)
Transport: Containers should be correctly labelled and secured against
falling over.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None.

Chemical reaction with water: The substance is water-reactive, releasing methyl isobutyl
ketoxime upon hydrolysis.

Dust explosion: Not applicable.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Recovery for recycling is not possible.

Industry - Possibility of neutralisation: The substance is water-reactive, releasing methyl isobutyl
ketoxime upon hydrolysis.

Industry - Possibility of destruction: controlled discharge: Not recommended.

Industry - Possibility of destruction - incineration: Incinerate at an approved facility. 100% destruction, treat
for silica oxide solid ash.

Industry - Possibility of destruction - water purification: Not recommended.

Industry - Possibility of destruction - other: None.

Public at large - Possibility of recovery/recycling: Public at large are not exposed to the substance as
notified.