Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 421-860-7 | CAS number: 156145-64-1
Guidance on Safe Use
Administrative data
First-aid measures
Emergency measure - Inhalation: Remove to fresh air. If breathing has stopped, apply
artificial respiration. If breathing is difficult, give
oxygen provided a qualified operator is available. Seek
medical attention.
Emergency measure - Eyes: Immediately flush with running water, continuing for at
least 15 minutes, lifting eyelids periodically to remove
contamination. Seek immediate medical attention.
Emergency measure - Skin: Wash affected area with soap and water, then flush with
large quantities of water. Remove contaminated clothing and
launder before re-use. Seek medical attention for any
irritation or any other symptoms.
Emergency measure - Ingestion: If conscious, rinse mouth out with water, then give two to
four glasses of water or milk. Seek immediate medical
attention.
Fire-fighting measures
Recommended extinguishing agent: Use carbon dioxide, dry chemical or alcohol foam (polar
solvent foam).
Product arising from burning: Combustion would be expectedto produce carbon monoxide,
carbon dioxide, and oxides of nitrogen.
Product determined by test: N
Protective equipment: Wear NIOSH approved self-contained positive pressure
breathing apparatus and protective clothing to prevent
contact with skin and eyes.
Accidental release measures
Emergency measures in case of spillage: Always wear recommended personal protective equipment.
Eliminate sources of ignition. Provide ventilation to spill
area. Absorb with inert absorbent and place in a closed,
approved, labeled waste container. For large spills, dike up
with inert material and pump into same container. Do not
allow pump to overheat. Do not allow to enter sewers or
waterways.
Handling and storage
Handling: Avoid contact with skin, eyes and clothing. Always wear
recommended personal protective equipment: Under normal
circumstances, rubber gloves and full work clothing are
adequate along with chemical safety glasses or goggles.If
contact with liquid is possible, wear impervious clothing.
Showering after work is recommended. Use with adequate
ventilation; use local ventilation at product handling and
transfer points. Ground material during liquid transfer to
avoid static build up.
Storage: Keep away from sources of ignition. Store in a cool, dry
well ventilated area away from heat, strong oxidizers and
acids. Keep containers upright and tightly sealed. Protect
from physical damage.
Packaging of the substance and or preparation: The substance is stored in 50 to 200 kg high density
polyethylene lined fibre drums.
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Transport: Not regulated for non bulk shipment. Containers should be
correctly labelled and secured against falling over.
For bulk shipment(>119 gal.): Combustible liquid, PG 111.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Stability and reactivity
Danger other than fire: None.
Chemical reaction with water: The substance is water-reactive, releasing methyl isobutyl
ketoxime upon hydrolysis.
Dust explosion: Not applicable.
Dust explosion determined by test: N
Disposal considerations
Industry - Possibility of recovery/recycling: Recovery for recycling is not possible.
Industry - Possibility of neutralisation: The substance is water reactive releasing methyl isobutyl
ketoxime upon hydrolysis.
Industry - Possibility of destruction: controlled discharge: Not recommended.
Industry - Possibility of destruction - incineration: Inicnerate at an approved facility. 100% destruction, treat
for silica oxide solid ash.
Industry - Possibility of destruction - water purification: Not recommended.
Industry - Possibility of destruction - other: None.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
