Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Administration of oxygen or fresh air. Seek medical
attention. Medical supervision for at least 48 hours.
Emergency measure - Eyes: Flush with copius amounts of water under open eye lid for
several minutes. Protect unaffected eye. Seek medical
attention. Medical supervision for at least 48 hours.
Emergency measure - Skin: Wash affected areas with copious amounts of water. Take off
contaminated clothing immediately. Seek medical attention.
Medical supervision for at least 48 hours.
Emergency measure - Ingestion: Rinse mouth with water. Afterwards drink plenty of water.
Seek medical attention. Medical supervision for at least 48
hours.

Fire-fighting measures

Recommended extinguishing agent: Adjust extinguishing operations according to the
environment.

Water, dry powder, foam and carbon dioxide.

Product arising from burning: Carbon oxide, nitrogen oxide (NOx),hydrogen bromide (HBr),
sulfur oxide.

Residues of combustion and contaminated water for fire
protection have to be disposed according to competent
authority regulations.

Product determined by test: N

Protective equipment: Circulating air indepentent respirator.

Avoid inhaling of evolving explosion and fire gases.

Accidental release measures

Emergency measures in case of spillage: Keep unprotected persons away.

Remove all sources of ignition.


Take up spilt material avoiding the formation of dust (e. g.
by wetting with water or by using an approved industrial va-
cuum cleaner). Carefully transfer the spilt material to
waste containers which must be tightly closed and labelled
according to TRGS 201.

Dispose of according to local regulations.

While taking up the spilt material and cleaning the polluted
area avoid any skin and eye contact as well as any inhala-
tion of the substance by wearing appropriate personal pro-
tective equipment (see section 'Handling').


Do not drain into surface water of canalisation.

Handling and storage

Handling: All working methods must always be designed so that exposure
by inhalation of the substance and by skin contact is mini-
mized. Eye contact with the substance should be avoided.


Use closed equipment during filling, transfer and metered
feeding as well as during sampling.

In the case of handling the substance in open systems,ex-
tract any dust which forms directly at the point of origin.
The extracted air may only be returned to the working area
after sufficient cleaning using approved equipment.

If technical extraction or ventilation measures are not pos-
sible or are insufficient, suitable respiratory protection
(e.g. full face mask (EN 136), combination filter ABEK-P3
(EN 141)) has to be worn.

To avoid skin contact, tested protective gloves (e.g. gloves
category III (EN 374). durability: level 6 (480 min)) and,
if applicable, suitable protective clothing has to be worn.
To avoid eye contact, safe eye protection (e.g. tightly fit-
ting goggles with lateral protection (not necessary in case
full face mask is used)) should be worn.


Keep to a minimum the number of workers in each of the af-
fected working areas.

Adequate washing facilities should be provided in the imme-
diate vicinity of the working area.

Contaminated clothing must be changed immediately.

After contact with the skin, the affected parts of the body
should be thoroughly cleaned instantly using plenty of wa-
ter.

Outdoor clothing has to be kept separate from working
clothes.


In cases where dusts can form, due to the potential dust-ex-
plosion risk, potential sources of ignition should be remo-
ved from the working area. In addition, measures should be
taken to prevent electrostatic discharges.

Storage: Store the substance in the original packing drums or other
secure containers which are labelled according to the re-
gulations. Keep them tightly closed and secure them against
falling by taking the appropriate measures.

Avoid residues on the outside of the containers and any for-
mation of dust.

Static discharges must be avoided.

Protect containers from heat and direct insolation.

Observe prohibitions on the joint storage of different mate-
rials (see Technical Rule 514).

Open handling without suitable personal protective equipment
(see section 'Handling') must be avoided.

Packaging of the substance and or preparation: Drums with polyethylene bags

Content: 50-200 l (25-100 kg)

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: Not available.
Transport: No hazardous good in terms of transport instructions.

Use suitable tightly closed containers only. Protect against
falling and label properly.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: CMR-Classification:

toxic to reproduction , Kat. RE 2 (N,N-Dimethylformamide)
R61: May cause harm to the unborn child


Water hazard class:

VWVWS/FSE

Classified in WGK 2 - water contaminating


Limitation of Employment for young persons (German
JArbSchG), as well as for expectant and breastfeeding
mothers (maternity protection - German MuSchRiV)

Chemical reaction with water: No reaction known.

Dust explosion: Dust can form explosive compositions with air.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Large quantities: moisten, pick up mechanically and transfer
to waste disposal.

Residues: Use appropriate industrial vacuum cleaner for
absorption.

Industry - Possibility of neutralisation: No data provided.

Industry - Possibility of destruction: controlled discharge: No method indicated

Industry - Possibility of destruction - incineration: No information provided.

Residues of combustion have to be disposed according to
competent authority regulations.

Industry - Possibility of destruction - water purification: See above

Industry - Possibility of destruction - other: See above

Public at large - Possibility of recovery/recycling: Large quantities: moisten, pick up mechanically and transfer
to waste disposal.

Residues: Use appropriate industrial vacuum cleaner for
absorption.

Public at large - Possibility of neutralisation: No data provided.

Public at large - Possibility of destruction: controlled discharge: No information provided.

Public at large - Possibility of destruction - incineration: No information provided.

Public at large - Possibility of destruction - water purification: No information provided.

Public at large - Possibility of destruction - others: No information provided.

Residues of combustion and contaminated water for fire
protection has to be disposed according to competent
authority regulations.