Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures
Remove contaminated or saturated clothing.

Inhalation
Following inhalation of aerosols or mist:
Possible discomfort: irritation of mucous lining (nose, throat, eyes) cough, sneezing, flow of tears.
Move victims into fresh air.
If symptoms persist, consult a physician for treatment.

Skin contact
Wash off immediately with plenty of water.
If symptoms persist, consult a physician for treatment.

Eye contact
Keeping eyelid open, immediately rinse thoroughly for at least 5 minutes using plenty of water or, if necessary, eye rinsing solution.
Consult an ophthalmologist.

Ingestion
Have the mouth rinsed with water.
Have patient drink plenty of water in small sips.
Obtain medical attention.

Most important symptoms and effects, both acute and delayed
Symptoms - None known
Hazards - None known

Indication of any immediate medical attention and special treatment needed
If required, therapy of irritative effect.
If substance has been swallowed:
Early endoscopy in order to assess mucosa lesions in the oesophagus and stomach which may appear. If necessary, aspirate leftover substance.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media:
Dry chemical
Carbon dioxide (CO2)
sand
Foam

Unsuitable extinguishing media:
Water


Special hazards arising from the substance or mixture
In the case of fire, the following hazardous smoke fumes may be produced: carbon monoxide, carbon dioxide.

Advice for firefighters
Material used to extinguish fire and fire residue should not enter drainage systems, soil, or stretches of water. Material used to extinguish fire must be disposed of in accordance with the regulations issued by the appropriate local authorities.
In the event of fire, wear self-contained breathing apparatus.
Employ protective equipment commonly used in the event of fire.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Wear personal protective equipment.

Environmental precautions
Do not allow entrance in sewage water, groundwater or drainage systems.

Methods and material for containment and cleaning up
Use a liquid-binding material to take up small amounts
Keep in suitable, closed containers for disposal.

Handling and storage

Precautions for safe handling
Ensure suitable suction/aeration at the work place and with operational machinery.

Conditions for safe storage, including any incompatibilities
Advice on protection against fire and explosion
Normal measures for preventive fire protection.
Take precautionary measures against static charges, keep away from sources of ignition.
When repairs of the production system are to be made (e.g. welding work), the section to be repaired must be essentially free of product.
Storage
Keep in a dry, cool and well-ventilated place.
Keep container tightly closed.
Avoid heat effect and sources of ignition.
Advice on common storage
Do not store together with: oxidizing agents.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters
Other information
No substance-specific limiting value being known.

Exposure controls
Engineering measures
Ensure suitable suction/aeration at the work place and with operational machinery.
Personal protective equipment

Respiratory protection
Use suitable respiratory protection where aerosols/vapours are generated.

Hand protection
Wear protective gloves made of the following materials:.
Glove material Natural rubber (NR)
Material thickness 0,5 mm
Break through time > 480 min
Glove material Polychloroprene (PCP)
Material thickness 0,5 mm
Break through time > 480 min
Glove material PVC
Material thickness 0,5 mm
Break through time > 480 min
The material thickness and rupture time data do not apply to non-solute solids / dusts.
Selection of protective gloves to meet the requirements of specific workplaces.
Suitability for specific workplaces should be clarified with protective glove manufacturers.
Please observe that the daily duration of usage of a chemical protective glove is in practice far shorter due to the many influencing factors (e.g. temperature, mechanical strain on the glove material) than the permeation time determined acc. EN 374.

Eye protection
close-fitting protective goggles (e.g. closed goggles)

Skin and body protection
Wear suitable protective clothing.
Wash contaminated clothing before re-use.

Hygiene measures
Smoking, eating and drinking should be prohibited in the application area.
Wash face and/or hands before break and end of work.
Apply adequate skin protection agents before handling the product. Assure skin cleaning and skin care after work. Preventive skin protection is recommended.

Protective measures
The personal protective equipment used must meet the requirements of directive 89/686/EEC and amendments (CE certification).
It should be defined in the work place in the form of a risk analysis according to directive 89/686/EEC and amendments.

Stability and reactivity

Reactivity
No dangerous reaction known under conditions of normal use.

Chemical stability
Stable under recommended storage conditions.

Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.

Conditions to avoid
Keep away from sources of heat, flames and sparks.

Incompatible materials
strong oxidants

Hazardous decomposition products
No decomposition if stored and applied as directed.

Disposal considerations

Waste treatment methods

Product
Can be landfilled or incinerated, when in compliance with local regulations.

Uncleaned packaging
Do not reuse empty containers and dispose of in accordance with the regulations issued by the appropriate local authorities.
If there is product residue in the emptied container, follow directions for handling on the container's label.

Waste Key Number
No waste key number as per the European Waste Types List can be assigned to this product, since such classification is based on the (as yet undetermined) use to which the product is put by the consumer.
The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation with the disposal firm / producing firm / official authority.