Registration Dossier

Physical & Chemical properties

Endpoint summary

Administrative data

Description of key information

Based on its physical chemical properties, Soybean oil, epoxidized, Me ester, reaction products with propylene glycol,

does not need to be classified as hazardous according to the criteria of Regulation 1272/2008/EC (CLP).

Soybean oil, epoxidized, Me ester, reaction products with propylene glycol is a light yellow liquid.

Soybean oil, epoxidized, Me ester, reaction products with propylene glycol has a melting point of < 9 °C.

At 249 °C an exothermic effect was observed, possibly indicating decomposition.

The density of Soybean oil, epoxidized, Me ester, reaction products with propylene glycol at 20 °C is 984 kg/m3.

Soybean oil, epoxidized oil, Me ester, reaction products with propylene glycol has a vapour pressure of =< 3.2*10^-5 atm (=< 3.3 Pa; =< 3.3*10^-2 mbar) at 20°C and of =< 3.4*10^-4 atm (=< 3.4*10^1 Pa; =< 3.4*10^-1 mbar) at 50°C (the calculation  is based  on the  lowest  possible  boiling  temperature) according to the definition in the OECD Guideline 104 (Grain-Watson estimation).

Soybean oil, epoxidized, Me ester, reaction products with propylene glycol has a Partition Coefficient (log Pow) range of 3.7 - 6.2 at pH 7 and 35°C.

Soybean oil, epoxidized, Me ester, reaction products with propylene glycol has a water solubility of 495.2 mg/L at pH 6.0 and 20ºC.

Soybean oil, epoxidized oil, Me ester, reaction products with propylene glycol has a surface tension of 38.3 mN/m at 21ºC at a concentration of approx. 450 mg/L.

Soybean oil, epoxidized oil, Me ester, reaction products with propylene glycol has a flash point of 172°C.

Soybean oil, epoxidized oil, Me ester, reaction products with propylene glycol has an auto-ignition temperature of 365°C at 1024 hPa.

Additional information