Registration Dossier

Administrative data

First-aid measures

If inhaled : Move person into fresh air. If symptoms persist, call a physician.

In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off immediately with plenty of water.
Call a physician immediately.
Wash contaminated clothing before reuse.

In case of eye contact : Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Remove contact lenses.
Call a physician immediately.

If swallowed : If swallowed, rinse mouth with water (only if the person is conscious).
Call a physician immediately.

Most important symptoms and effects, both acute and delayed : Sensitisation
May cause sensitisation by skin contact.
Causes eye burns.

Indication of any immediate medical attention and special treatment needed : Treat symptomatically.

Fire-fighting measures

Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Water mist
Dry powder
Foam
Carbon dioxide (CO2)
Sand
Aqueous film forming foam (AFFF).

Unsuitable extinguishing media : Water spray jet

Hazardous combustion products : Carbon oxides
Nitrogen oxides (NOx)

Special protective equipment for firefighters : In the event of fire, wear self-contained breathing apparatus.

Further information : In the event of fire, cool tanks with water spray.

Accidental release measures

Personal precautions : Evacuate personnel to safe areas.
Isolate the area.
Prevent further leakage or spillage if safe to do so.
Ensure adequate ventilation.
Keep away from open flames, hot surfaces and sources of ignition.
Keep away from heat and sources of ignition.


Environmental precautions : Should not be released into the environment.

Methods for cleaning up : Large spills: Dam up. Soak up with inert absorbent material. Keep in properly labelled containers.
Small spills: Gently cover the spill with an absorbent towel or pad.
Large spills + Small spills: Keep in suitable, closed containers for disposal. Treat recovered material as described in the section "Disposal considerations".

Handling and storage

Advice on safe handling : To avoid thermal decomposition, do not overheat.
Use personal protective equipment as required.
Keep away from heat and sources of ignition.
Avoid inhalation, ingestion and contact with skin and eyes.

Hygiene measures : Handle in accordance with good industrial hygiene and safety practice.

Requirements for storage areas and containers : To maintain product quality, do not store in heat or direct sunlight. Store in original container. Keep containers tightly closed in a cool, well-ventilated place. Store at room tempera-ture.

Recommended storage tem-perature : 15 - 25 °C

Transport information

Land transport (ADR/RID)

UN number:
Not regulated as a dangerous good
Shippingopen allclose all
Class:
Not regulated as a dangerous good
Classification code:
Not regulated as a dangerous good
Packaging group:
Not regulated as a dangerous good
Labels:
Not regulated as a dangerous good
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not regulated as a dangerous good
Shippingopen allclose all
Class:
Not regulated as a dangerous good
Classification code:
Not regulated as a dangerous good
Packaging group:
Not regulated as a dangerous good
Labels:
Not regulated as a dangerous good
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not regulated as a dangerous good
Proper shipping name and description:
Not regulated as a dangerous good
Chemical name:
Not regulated as a dangerous good
Class:
Not regulated as a dangerous good
Packaging group:
Not regulated as a dangerous good
EmS code:
Not regulated as a dangerous good
Labels:
Not regulated as a dangerous good
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not regulated as a dangerous good
Proper shipping name and description:
Not regulated as a dangerous good
Chemical name:
Not regulated as a dangerous good
Class:
Not regulated as a dangerous good
Packaging group:
Not regulated as a dangerous good
Labels:
Not regulated as a dangerous good
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures : All personal protective equipment should be based on a risk assessment. Consult a Environment Health Safety expert if necessary.
Engineering controls should be used as the primary means to control possible exposures. Use process enclosures, local exhaust ventilation or other engineering controls to keep exposure levels below recommended exposure limits.

Personal protective equipment
Eye protection : Face-shield

Hand protection material : Nitrile rubber
Remarks : Take note of the information given by the producer concern-ing permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). Impervious gloves

Skin and body protection : disposable one-piece overall closed work clothing

Respiratory protection : Engineering controls should always be the primary method of controlling exposures.
If respiratory protective equipment is needed for certain activities, the type as well as the corresponding protection factor will depend upon the risk assessment and air concentrations, hazards, physical and warning properties of substances present.
Use only respiratory protection that conforms to international/ national standards.
Respirator with a vapour filter
ABEK

Protective measures : The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Stability and reactivity

Reactivity : None reasonably foreseeable.
Chemical stability : Stable under recommended storage conditions.
Hazardous reactions : No dangerous reaction known under conditions of normal use.
Conditions to avoid : To avoid thermal decomposition, do not overheat. Heat, flames and sparks.
Materials to avoid : Strong oxidizing agents
Hazardous decomposition products : Carbon oxides, Nitriles

Disposal considerations

Product : Must be incinerated in a suitable incineration plant holding a permit delivered by the competent authorities.
In accordance with National, Federal, State and Local regulations.

Contaminated packaging : Empty containers should be taken to an approved waste handling site for recycling or disposal.