Registration Dossier

Administrative data

First-aid measures

Description of first aid measures:
Eye contact : Immediately flush eye(s) with plenty of water.
Skin contact : Wash off with soap and water. Consult a physician if necessary.
Ingestion : Rinse mouth with plenty of water. Consult a physician.
Inhalation : Take person to fresh air. Consult a physician if necessary.

Most important symptoms and effects:
Symptoms : No data available

Indication of immediate medical attention and special treatment needed:
General advice : Call a physician immediately.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media: Water spray., Dry extinguishing powder., Carbon dioxide (CO2)., Foam.
Extinguishing media which must not be used for safety reasons: Do not use a solid water stream as it may scatter and spread fire.

Special hazards arising from the substance or mixture:
Specific hazards during fire fighting: In case of fire, thermal decomposition with emission of hazardous fumes is possible Carbon monoxide (CO), Carbon dioxide (CO2). Nitrogen oxides
Further information: Collect contaminated fire extinguishing water separately. This must not be discharged into drains.Avoid dust formation.

Advice for fire-fighters:
Special protective equipment for fire-fighters: Regular fire intervention clothes.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Personal precautions : Cleanup personnel must use appropriate personal protective equipment.
Additional advice : Avoid dust formation.

Environmental precautions:
Environmental precautions : The product should not be allowed to enter drains, water courses or the soil.

Methods and material for containment and cleaning up:
Methods for cleaning up : Collect spilled material with vacuum cleaner or sweep up. Collect the product in a plastic vessel. Flush small quantities of spilt product away with large quantities of water.

Handling and storage

Precautions for safe handling:
Advice on safe handling : Avoid dust formation.Prevent product from diffusing.Handle in accordance with good industrial hygiene and safety practice.
Hygiene measures : Employees should wash their hands and face before eating, drinking, or using tobacco products.
Advice on protection against fire and explosion : Avoid heat or open flame.Avoid dust formation.

Conditions for safe storage:
Requirements for storage areas and containers: Keep in a dry place.Keep container closed when not in use.
Further information on storage conditions: Keep container in a well-ventilated place.
Advice on common storage: No data available

Specific end use:
This substance is used only by trained professionals under restricted conditions.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls:
Occupational exposure controls:
Instruction measures to prevent exposure: Employees should wash their hands and face before eating, drinking, or using tobacco products.
Technical measures to prevent exposure: Ensure adequate ventilation.

Personal measures to prevent exposure:
Respiratory protection : Dust mask class P2.
Hand protection: Use chemical resistant gloves. In case of prolonged immersion
or frequently repeated contact use gloves made of the materials: butylrubber (thickness >= 0.70 mm, breakthrough time > 480 min).(EN 374). The use of protective gloves should conform to the specifications of EC directive 89/686/EC and the resultant standard EN374.
Additional advice: The data are based on own tests, literature data and information of glove manufacturers or derived from similar substances. Because several factors may influence these properties (eg temperature), one should take into account the fact that the life of a chemical gloves in practice may be considerably shorter than indicated by the permeation test. The high diversity of types of use are prescribed by the manufacturer. Use chemical resistant gloves. In case of prolonged immersion or frequently repeated contact use gloves made of the materials: butyl rubber (thickness >= 0.36 mm, breakthrough time > 480 min), nitrile rubber (thickness >= 0.38 mm, breakthrough time > 480 min) or neoprene (thickness >= 0.65 mm, breakthrough time > 240 min). For intermittent splash protection corresponding gloves with breakthrough times > 60 min can be used. Avoid gloves made of: natural latex.
Eye protection : Safety glasses.
Body Protection : Safety clothes.
Personal protective equipment: Emergency showers and eye wash stations should be available. Eye-wash bottle with clean water.

Environmental exposure controls:
Effluent regulations/discharge/treatment/contents may vary from one area to another. Please consult the local regulations regarding the disposal of this material. Do not release into drain. Collect for removal by a licensed waste contractor.

Stability and reactivity

Reactivity : no data available
Stability : Stable material (at room temperature)
Conditions to avoid : No data available
Materials to avoid : No data available
Hazardous decomposition products : Carbon monoxide (CO),Carbon dioxide (CO2).Nitrogen oxides

Disposal considerations

Waste treatment methods:
Waste disposal methods
Effluent regulations/discharge/treatment/contents may vary from one area to another. Please consult the local regulations regarding the disposal of this material. Do not release into drain. Collect for removal by a licensed waste contractor.
For waste resulting from the expired product, it is recommended to use European Waste Code : 20 01 17 (photochemicals).