Registration Dossier

Administrative data

First-aid measures

General information
If you feel unwell, seek medical advice (show the label where possible). Show safety data sheet to the doctor in attendance. Where there is a potential for eye exposure to this substance, an eye wash fountain should be provided within the immediate work area for emergency use.

Description of first aid measures
Inhalation: Remove to fresh air. If the affected person is not breathing, apply artificial respiration. If breathing is difficult, give oxygen. Call a physician if symptoms develop or persist.
Skin contact: Wash the skin immediately with soap and water. Get medical attention if irritation develops or persists.
Eye contact: Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation develops or persists.
Ingestion: Never give anything by mouth to an unconscious person. If swallowed, do not induce vomiting. Give several glasses of water to dilute contents of stomach and call a physician.

Most important symptoms and effects, both acute and delayed
Contact with eyes may cause irritation. Inhalation of dusts may cause respiratory irritation. Contact with skin may cause irritation.

Indication of any immediate medical attention and special treatment needed
Not available.

Fire-fighting measures

General fire hazards
This product is not flammable.

Extinguishing media
Suitable extinguishing media: Use extinguishing agent suitable for type of surrounding fire.
Unsuitable extinguishing media: Not applicable.

Special hazards arising from the substance
None known.

Advice for firefighters
Special protective equipment for firefighters: Use protective equipment appropriate for surrounding materials.
Special fire fighting procedures: Not a fire hazard.

Specific methods
Not established.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency personnel: Wear appropriate protective equipment and clothing during clean-up. Avoid inhalation of dust from the spilled material.
For emergency responders: Keep unnecessary personnel away.

Environmental precautions
Do not discharge into drains, water courses or onto the ground.

Methods and material for containment and cleaning up
Avoid dust formation. Following product recovery, flush area with water. Collect powder using special dust vacuum cleaner with particle filter or carefully sweep into closed container.

Handling and storage

Precautions for safe handling
Provide appropriate exhaust ventilation at machinery and at places where dust can be generated. Keep formation of airborne dusts to a minimum. when using, do not eat, drink or smoke. Wash hands throughly after handling.

Conditions for safe storage, including any incompatibilities
Store in closed original container in a dry place. Room temperature - normal conditions. Use care in handling/storage. Keep in properly labelled containers.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls
Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits.

Individual protection measures, such as personal protective equipment:
Eye/face protection: Safety glasses with side-shields.
Skin protection:
- Hand protection: Rubber or plastic gloves. PVC disposable gloves. Use impervious gloves.
- Other: Normal work clothing (long sleeved shirts and long pants) is recommended.
Respiratory protection: If engineering controls do not maintain airborne concentrations below recommended exposure limits (where applicable) or to an acceptable level (in countries where exposure limits have not been established), an approved respirator must be worn.
Thermal hazards: Not applicable.

Hygiene measures
Use personal protective equipment as required. Handle in accordance with good industrial hygiene and safety practices.

Environmental exposure controls
Contain spills and prevent releases and observe national regulations on emissions.

Stability and reactivity

None known.

Chemical stability
Stable under normal temperature conditions and recommended use.

Possibility of hazardous reactions
Hazardous polymerisation does not occur.

Conditions to avoid
None known.

Incompatible materials
None known.

Hazardous decomposition products
No hazardous decomposition products are known.

Disposal considerations

Waste treatment methods
Residual waste: Dispose of in accordance with local regulations.
Contaminated packaging: Since emptied containers retain product residue, follow label warnings even after container is emptied.
EU waste code: Waste codes should be assigned by the user based on the application for which the product was used.
Disposal methods/information: All wastes must be handled in accordance with local, state and federal regulations.