Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: In case of accident by inhalation: remove casualty to fresh
air out of the dangerous area.
Emergency measure - Eyes: On contact with the eyes, rinse the eyes with clean and
flowing water with the eyelids open for at least 10 minutes.
Remove contacts.
Emergency measure - Skin: If skin irritation persists, seek medical advice.

On contact with the skin, wash off immediately with plenty
of clean and flowing water for at least 15 minutes.

Remove contaminated, saturated clothing immediately.
Emergency measure - Ingestion: A person which vomits in a supine position bring in a
recovery position. Do not induce vomiting. Rinse out mouth
and then drink plenty of water. Never administer an
unconscious person anything orally.

Fire-fighting measures

Recommended extinguishing agent: Suitable extinguishing media are water spray mist,
alcoholresistant foam, dry fire-extinguishing media or
carbon dioxide.

Extinguishing media like full water jet should not be used
for safety reasons. Furthermore, do not use a solid water
stream as it may scatter or spread fire.

Product arising from burning: Carbon monoxide and carbon dioxide.

Product determined by test: N

Protective equipment: Use protecting clothing and breathing apparatus with
independent air supply (isolated).

Accidental release measures

Emergency measures in case of spillage: Protecting clothing should be worn, including gloves (i.e.
chloropren level 2 and butyl rubber level 6) and goggles.
Ensure adequate ventilation, keep people away and stay on
the upwind side.

Suppress gases/vapours/mists with water spray jet. Wipe up
with absorbent material (e.g. cloth, fleece). Dispose of
contaminated clothing as hazardous waste. Ventilate area and
wash spill site after material pick up is complete. The
local authorities should be informed if great quantities of
leaked material cannot be removed. Specific environmental
measures are not necessary.

Do not allow to enter drains/surface waters/groundwater.

Handling and storage

Handling: As far as possible, splash guard equipment must be used
during filling, transfer and metered feeding as well as
during sampling. If necessary, any vapours/aerosols that

can be formed should be extracted directly at the point of

If technical extraction or ventilation measures are not
possible or are insufficient, the wearing of respiratory
protection is recommended. To avoid skin contact,

tested protective gloves (e.g. chloropren level 2 or
butylrubber level 6) should be worn as well as lightweight
protective clothing for the body protection. To avoid

eye contact, safe eye protection should be worn.

Wash hands before breaks and after work. Change contami-
nated clothing immediately.

Storage: Keep in a cool place, protect from light to maintain the
product quality.

Secure the container against falling.

Keep only in original containers.

Avoid product residues on the containers.

Packaging of the substance and or preparation: 15 and 30 liter canister, respectively; consisting of
aluminium and polyethylene.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Transport: Not classified as dangerous in the meaning of transport

Keep only in original containers.

Close container tightly before transport and secure against
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: unknown

Chemical reaction with water: unknown

Dust explosion: not expected; substance is a liquid

Dust explosion determined by test: N

Disposal considerations

Categories Display