Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-618-5 | CAS number: -
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
General advice: Take off all contaminated clothing immediately.
If inhaled: Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing, medical advice is required.
In case of skin contact: In case of skin contact wash affected areas thoroughly with soap and plenty of water. Consult a doctor in the event of a skin reaction.
In case of eye contact: Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long period of time (at least 10 minutes). Contact an ophthalmologist.
If swallowed: DO NOT induce the patient to vomit, medical advice is required.
Notes to physician: Basic first aid, decontamination, symptomatic treatment.
Therapeutic measures: No information available.
If inhaled: Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing, medical advice is required.
In case of skin contact: In case of skin contact wash affected areas thoroughly with soap and plenty of water. Consult a doctor in the event of a skin reaction.
In case of eye contact: Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long period of time (at least 10 minutes). Contact an ophthalmologist.
If swallowed: DO NOT induce the patient to vomit, medical advice is required.
Notes to physician: Basic first aid, decontamination, symptomatic treatment.
Therapeutic measures: No information available.
Fire-fighting measures
Suitable extinguishing media: Carbon dioxide (CO2), Foam, extinguishing powder, in cases of larger fires, water spray should be used.
Unsuitable extinguishing media: High volume water jet.
Burning releases carbon monoxide, carbon dioxide, oxides of nitrogen, isocyanate vapors and traces of hydrogen cyanide. In the event of fire and/or explosion do not breathe fumes.
During fire-fighting respirator with independent air-supply and airtight garment is required.
Do not allow contaminated extinguishing water to enter the soil, ground-water or surface waters.
Unsuitable extinguishing media: High volume water jet.
Burning releases carbon monoxide, carbon dioxide, oxides of nitrogen, isocyanate vapors and traces of hydrogen cyanide. In the event of fire and/or explosion do not breathe fumes.
During fire-fighting respirator with independent air-supply and airtight garment is required.
Do not allow contaminated extinguishing water to enter the soil, ground-water or surface waters.
Accidental release measures
Put on protective equipment (see section 8). Keep away from sources of ignition. Ensure adequate ventilation/exhaust extraction. Keep unauthorized persons away.
Do not allow to escape into waterways, wastewater or soil.
Remove mechanically; cover the remainder with wet, absorbent material (e.g. sawdust, chemical binder based on calcium silicate hydrate, sand). After approx. one hour transfer to waste container and do not seal (evolution of CO2!). Keep damp in a safe ventilated area for several days.
Do not allow to escape into waterways, wastewater or soil.
Remove mechanically; cover the remainder with wet, absorbent material (e.g. sawdust, chemical binder based on calcium silicate hydrate, sand). After approx. one hour transfer to waste container and do not seal (evolution of CO2!). Keep damp in a safe ventilated area for several days.
Handling and storage
Provide sufficient air exchange and/or exhaust in work rooms. Exhaust ventilation necessary if product is sprayed.
The threshold limit values noted in section 8 must be monitored. In all areas where isocyanate aerosols and/or vapor concentrations are produced in elevated concentrations, exhaust ventilation must be provided in such a way that the workplace exposure limits (WEL) is not exceeded. The air should be drawn away from the personnel handling the product
The personal protective measures described in section 8 must be observed. The precautions required in the handling of solvents and isocyanates must be taken. Avoid contact with skin and eyes and the inhalation of vapor.
Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at end of work and use skin-protecting ointment. Keep working clothes separately. Take off all contaminated clothing immediately.
Keep container dry and tightly closed in a cool and well ventilated place. Further information on the storage conditions which must be observed to preserve quality can be found in our product information sheet.
Storage class (TRGS 510) : 11: Combustible Solids
The threshold limit values noted in section 8 must be monitored. In all areas where isocyanate aerosols and/or vapor concentrations are produced in elevated concentrations, exhaust ventilation must be provided in such a way that the workplace exposure limits (WEL) is not exceeded. The air should be drawn away from the personnel handling the product
The personal protective measures described in section 8 must be observed. The precautions required in the handling of solvents and isocyanates must be taken. Avoid contact with skin and eyes and the inhalation of vapor.
Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at end of work and use skin-protecting ointment. Keep working clothes separately. Take off all contaminated clothing immediately.
Keep container dry and tightly closed in a cool and well ventilated place. Further information on the storage conditions which must be observed to preserve quality can be found in our product information sheet.
Storage class (TRGS 510) : 11: Combustible Solids
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not dangerous goods
Shippingopen allclose all
SpecialProvisionsopen allclose all
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not dangerous goods
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
- UN number:
- Not dangerous goods
Shippingopen allclose all
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not dangerous goods
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Respiratory protection
Respiratory protection required in insufficiently ventilated working areas and during spraying. An air-fed mask, or for short periods of work, a combination of charcoal filter and particulate filter is recommended.
In case of hypersensitivity of the respiratory tract and skin (e.g. asthmatics and those who suffer from chronic bronchitis and chronic skin complaint) it is inadvisable to work with the product.
Hand protection
Suitable materials for safety gloves; EN 374:
Nitrile rubber - NBR: thickness >=0,35mm; breakthrough time >=480min.
Polyvinyl chloride - PVC: thickness >=0,5mm; breakthrough time >=480min.
Polychloroprene - CR: thickness >=0,5mm; breakthrough time >=480min.
Butyl rubber - IIR: thickness >=0,5mm; breakthrough time >=480min.
Fluorinated rubber - FKM: thickness >=0,4mm; breakthrough time >=480min.
Recommendation: contaminated gloves should be disposed of.
Eye protection
Wear eye/face protection.
Skin and body protection
Wear suitable protective clothing.
Respiratory protection required in insufficiently ventilated working areas and during spraying. An air-fed mask, or for short periods of work, a combination of charcoal filter and particulate filter is recommended.
In case of hypersensitivity of the respiratory tract and skin (e.g. asthmatics and those who suffer from chronic bronchitis and chronic skin complaint) it is inadvisable to work with the product.
Hand protection
Suitable materials for safety gloves; EN 374:
Nitrile rubber - NBR: thickness >=0,35mm; breakthrough time >=480min.
Polyvinyl chloride - PVC: thickness >=0,5mm; breakthrough time >=480min.
Polychloroprene - CR: thickness >=0,5mm; breakthrough time >=480min.
Butyl rubber - IIR: thickness >=0,5mm; breakthrough time >=480min.
Fluorinated rubber - FKM: thickness >=0,4mm; breakthrough time >=480min.
Recommendation: contaminated gloves should be disposed of.
Eye protection
Wear eye/face protection.
Skin and body protection
Wear suitable protective clothing.
Stability and reactivity
This information is not available.
Disposal considerations
Dispose in accordance with applicable international, national and local laws, ordinances and statutes. For disposal within the EC, the appropriate code according to the European Waste Catalogue (EWC) should be used.
After final product withdrawal, all residues must be removed from containers (drip-free, powder-free or paste-free). Once the product residues adhering to the walls of the containers have been rendered harmless, the product and hazard labels must be invalidated. These containers can be returned for recycling to the appropriate centres set up within the framework of the existing take-back scheme of the chemical industry.
Containers must be recycled in compliance with national legislation and environmental regulations.
None disposal into waste water.
After final product withdrawal, all residues must be removed from containers (drip-free, powder-free or paste-free). Once the product residues adhering to the walls of the containers have been rendered harmless, the product and hazard labels must be invalidated. These containers can be returned for recycling to the appropriate centres set up within the framework of the existing take-back scheme of the chemical industry.
Containers must be recycled in compliance with national legislation and environmental regulations.
None disposal into waste water.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
