Registration Dossier

Administrative data

First-aid measures

General information Remove affected person from source of contamination. Keep the affected person warm and at
rest. Get prompt medical attention.
Inhalation Move person into fresh air, if not breathing give artificial respiration. Consult a physician.
Ingestion If swallowed do not induce vomiting. Clean mouth with water and drink afterwards plenty of
water. Seek medical advice.
Skin contact Wash skin thoroughly with soap and water for several minutes. Get medical attention promptly
if symptoms occur after washing.
Eye contact Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and
open eyelids widely. If irritation persists: Seek medical attention and bring along these
instructions.
Protection of first aiders First aid personnel should wear appropriate protective equipment during any rescue.

Fire-fighting measures

SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media Alcohol resistant foam but, if not available, normal foam can be used.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion
products
Thermal decomposition or combustion may liberate oxides of carbon and hydrogen chloride.
5.3. Advice for firefighters
Protective actions during
firefighting
Avoid the spillage or runoff entering drains, sewers or watercourses.
Special protective equipment
for firefighters

Accidental release measures

SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions For personal protection, see section 8.
6.2. Environmental precautions
Environmental precautions Do not discharge into drains or watercourses or onto the ground.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up Wear suitable personal protective equipment. Contain spillage, absorb onto an inert material
(e.g. sand, vermiculite). Take up mechanically (e.g. sweep up) into suitable containers, and
dispose of as hazardous waste.

Handling and storage

SECTION 7: Handling and storage
7.1. Precautions for safe handling
Usage precautions Wear protective clothing, gloves, eye and face protection.
7.2. Conditions for safe storage, including any incompatibilities
Storage precautions Store in a tightly closed container in a cool and well ventilated place.
7.3. Specific end use(s)
Specific end use(s) The identified uses for this product are detailed in Section 1.2.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
3082
Shippingopen allclose all
Labels:
9
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
3082
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
3082
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S., (1,10-Dichlorodecane)
Chemical name:
1,10-Dichlorodecane
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
3082
Shipping information
Proper shipping name and description:
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S., (1,10-Dichlorodecane)
Chemical name:
1,10-Dichlorodecane
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

SECTION 8: Exposure Controls/personal protection
8.1. Control parameters
Occupational exposure limits
No occupational exposure limit has been set for this substance

Appropriate engineering
controls
Use process enclosures, local exhaust ventilation or other engineering controls as the primary
means to minimise worker exposure.
Personal protection Avoid inhalation, ingestion and contact with skin, eye and clothing.
Eye/face protection Use approved safety goggles or glasses. Use equipment for eye protection tested and
approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Hand protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the
specifications of EU Directive 2016/425 and the standard EN 374 derived from it.
Other skin and body
protection
Protective overalls.
Hygiene measures Good personal hygiene procedures should be implemented.
Respiratory protection Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).

Stability and reactivity

SECTION 10: Stability and reactivity
10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.
10.2. Chemical stability
Stability Stable under normal conditions of use.
10.3. Possibility of hazardous reactions
Possibility of hazardous
reactions
Not determined.
10.4. Conditions to avoid
Conditions to avoid Avoid excessive heat for prolonged periods of time.
10.5. Incompatible materials
Materials to avoid Strong oxidising agents. Acid chlorides. Acid anhydrides.
10.6. Hazardous decomposition products
Hazardous decomposition
products
Thermal decomposition or combustion may liberate oxides of carbon and hydrogen chloride.

Disposal considerations

SECTION 13: Disposal considerations
13.1. Waste treatment methods
General information Waste is classified as hazardous waste. Disposal to licensed waste disposal site in
accordance with national and local authority regulations.
Disposal methods Incineration using appropriate licensed facilities.