Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures
After inhalation: fresh air.

After skin contact: wash off with plenty of water. Remove contaminated clothing.

After eye contact: rinse out with plenty of water.

After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.

Most important symptoms and effects, both acute and delayed
We have no description of any toxic symptoms.

Indication of any immediate medical attention and special treatment needed
No information available.

Fire-fighting measures

Firefighting measures
Extinguishing media
Suitable extinguishing media: water, carbon dioxide, foam, dry powder.
Unsuitable extinguishing media: For this substance/mixture no limitations of extinguishing agents are given.

Special hazards arising from the substance or mixture
Combustible.
Development of hazardous combustion gases or vapours possible in the event of fire.
Fire may cause evolution of: nitrogen oxides.

Advice for firefighters
Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus.
Further information
Suppress (knock down) gases/vapours/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or ground water system.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.
Advice for emergency responders: Protective equipment see section “Exposure controls/personal protection”.

Environmental precautions
No special precautionary measures necessary.

Methods and materials for containment and cleaning up
Observe possible material restrictions (see sections “Handling and storage” and “Stability and Reactivity”).
Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.

Reference to other sections
Indications about waste treatment see section “Disposal considerations”.

Handling and storage

Precautions for safe handling
Observe label precautions.

Conditions for safe storage, including any incompatibilities
Protected from light. Tightly closed. Dry. Store at +5 °C to +30 °C.

Specific end use(s)
Apart from the use in pharmaceutical production, no other specific uses are stipulated.

Transport information

Land transport (UN RTDG/ADR/RID)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not classified as dangerous in the meaning of transport regulations.

Inland waterway transport (UN RTDG/ADN(R))

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not relevant.

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not classified as dangerous in the meaning of transport regulations.

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Remarks:
Not classified as dangerous in the meaning of transport regulations.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control Parameters
Exposure Controls
Engineering measures: Technical measures and appropriate operations should be given priority over the use of personal protective equipment.
See section “Precautions for safe handling” in “Handling and Storage”.

Individual protection measures
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.

Hygiene measures
Change contaminated clothing. Wash hands after working with substance.

Eye/face protection: Safety glasses

Hand protection
Full contact
Glove material: nitrile rubber
Glove thickness: 0.11 mm
Break through time: > 480 min

Splash contact
Glove material: nitrile rubber
Glove thickness: 0.11 mm
Break through time: > 480 min

The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact).
The breakthrough times stated above were determined by KCL in laboratory tests according to EN374 with samples of the recommended glove types.
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Respiratory protection:
Required when dusts are generated. Recommended filter type: P1 Filter
The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Stability and reactivity

Reactivity
The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.

Chemical stability
Sensitivity to light.

Possibility of hazardous reactions
Violent reactions possible with: strong oxidizing agents, acids.

Conditions to avoid: strong heating (decomposition).

Incompatible materials: no information available.

Hazardous decomposition products: in the event of fire see section “Firefighting measures”

Disposal considerations

Waste treatment methods
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have any further questions.