Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
Eye contact: Rinse immediately with plenty of water for at least 15 minutes keeping eyelids open. Get medical attention, if irritation persists.
Skin contact: Take off contaminated clothing. Wash the exposed parts of body with plenty of soap and water. Get medical attention, if irritation persists.
Swallowing: Never give fluids if patient is unconscious. If the person is conscious, rinse mouth with water. In case of spontaneous vomiting be sure that vomitus can freely drain due to danger of suffocation. Do not induce vomiting. Get medical attention.
Inhalation: Move the victime into fresh air. Apply artificial respiration if victim is not breathing. If breathing is difficult, give oxygen. Get medical attention.

Most important symptoms and effects, both acute and delayed
This product may cause irritation to eyes, skin and mucous membranes and respiratory system. May be harmful if inhaled. May be harmful if swallowed.

Indication of any immediate medical attention and special treatment needed
In case of necessity Contact the Poisons Information Centre. Symptomatic treatment.

Fire-fighting measures

Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Do not use water jet.

Special hazards arising from the substance or mixture
COx, NOx.

Advice for firefighters
Protection of firefighters: self breathing apparatus and chemical-protective clothing.
In case of nearby fire keep containers cool with waterspray.
Do not release chemically contaminated water into drains, soil or surface water. Sufficient measures must be taken to retain the water used for extinguishing. Dispose of contaminated water and soil according to local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Ventilate confined areas. Sources of ignition should be kept well clear. Avoid contact with skin and eyes. Mask with filter for organic dust, rubber gloves and protective clothing.

Environmental precautions
Prevent entry into sewage systems, ground and surface waters. Inform respective authorities in case of seepage into water course or sewage system.

Methods and material for containment and cleaning up
Moisten with water the product spilled and take up with absorbent non combustible material.
After material pickup is complete wash spill site and ventilate area.

Handling and storage

Precautions for safe handling
Protective measures:
Keep away from heat / sparks / open flames / hot surfaces. Do not smoke. Protect from light. Take precautionary measures against static electricity. Containers should be electrically grounded/bonded during transfer of material to prevent static spark/electrostatic discharge. Explosion-proof electrical fixture should be present in areas of use.
Advice on general occupational hygiene:
Observe the usual precautionary measures for handling chemicals. Avoid eye, skin, and clothing contact. Do not inhale. Do not reuse contaminated clothing. Wash hands thoroughly after handling. Do not eat, drink or smoke with dirty hands. Close containers immediately after use.

Conditions for safe storage, including any incompatibilities
Store in tightly closed and properly labeled containers. Store in a dry, well-ventilated, cool and dark place. Avoid incompatible materials. Keep away from heat / sparks / open flames. Keep at temperature not exceding 30 °C.

Specific end uses
Particular uses are not expected.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls
Ensure adequate ventilation, especially in enclosed spaces.
Individual protection measures, such as personal protective equipment
(a) Eye/face protection: safety glasses /face-shield

(b) Skin protection:i) Hand protection: rubber gloves (i.e. nitrile). When prolonged or frequently contact may occur, a glove with a protection class of 5 or higher (breakthrough time greater than 240 minutes according to EN 374) is recommended. When only brief contact is expected, a glove with a protection class of 3 or higher (breakthrough time greater than 60 minutes according to EN 374) is recommended.
ii) Other: Protective clothing.

(c) Respiratory protection: Mask with filter for organic dust (UNI EN 143).
(d) Thermal hazards: n.a.

Environmental exposure controls
Provide all technical precautions to avoid the dispersion of material in the surrounding environment.

Stability and reactivity

Reactivity
The substance does not present additional dangers of reactivity than those reported in the next subtitle.

Chemical stability
Stable under normal handling procedures.

Possibility of hazardous reactions
No hazardous polymerization.

Conditions to avoid
Avoid exposure to heat, direct sunlight and sources of ignition. Take precautionary measures against static electricity.

Incompatible materials
Strong oxidizing agents.

Hazardous decomposition products
When heated to decomposition may emit toxic fumes.

Disposal considerations

Waste treatment methods
Do not dispose the product, either new or used, by discharging into sewers, tunnels, lakes or water courses.
Dispose wastes and contaminated packaging according to official regulations.