Registration Dossier

Administrative data

First-aid measures

4.1. Description of first aid measures
Skin contact: Remove all contaminated clothes and footwear immediately. Wash immediately with plenty of soap and water. Consult a doctor.
Eye contact: Bathe the eye with running water for 15 minutes. Seek medical attention if symptoms persist.
Ingestion: Do not induce vomiting. Wash out mouth with water. If conscious, give half a litre of water to drink immediately. Consult a doctor.
Inhalation: Remove casualty from exposure ensuring one's own safety whilst doing so. Consult a doctor.
4.2. Most important symptoms and effects, both acute and delayed
Skin contact: There may be irritation and redness at the site of contact.
Eye contact: There may be irritation and redness.
Ingestion: There may be soreness and redness of the mouth and throat. Nausea and stomach pain may occur. There may be vomiting.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may cause coughing or wheezing.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure.
4.3. Indication of any immediate medical attention and special treatment needed
Immediate / special treatment: Show this safety data sheet to the doctor in attendance.

Fire-fighting measures

5.1. Extinguishing media
Extinguishing media: Water spray. Carbon dioxide. Alcohol resistant foam. Dry chemical powder. Use water spray to cool containers.
5.2. Special hazards arising from the substance or mixture
Exposure hazards: In combustion emits toxic fumes of carbon dioxide / carbon monoxide. / In combustion emits toxic fumes of sulphur oxides.
5.3. Advice for fire-fighters
Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.

Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions: Do not attempt to take action without suitable protective clothing - see section 8 of SDS. Mark out the contaminated area with signs and prevent access to unauthorised personnel. Do not create dust.
6.2. Environmental precautions
Environmental precautions: Contain spillage. Do not discharge into drains or rivers.
6.3. Methods and material for containment and cleaning up
Clean-up procedures: Transfer to a closable, labelled salvage container for disposal by an appropriate method.

Handling and storage

7.1. Precautions for safe handling
Handling requirements: Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area. Avoid the formation or spread of dust in the air. Do not handle in a confined space.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions: Store in a cool, well ventilated area. Keep container tightly closed.
7.3. Specific end use(s)
Specific end use(s): PC32: Polymer preparations and compounds.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Not applicable
Shippingopen allclose all
Labels:
None
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
Not applicable
Shippingopen allclose all
Labels:
None
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
Not applicable
Shipping information
Proper shipping name and description:
None
Chemical name:
None
Labels:
None
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
Not applicable
Shipping information
Proper shipping name and description:
None
Chemical name:
None
Labels:
None
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

8.2. Exposure controls
Engineering measures: Ensure there is sufficient ventilation of the area.
Respiratory protection: Respiratory protective device with particle filter. Self-contained breathing apparatus must be
available in case of emergency.
Hand protection: Impermeable gloves.
Eye protection: Safety glasses. Ensure eye bath is to hand.
Skin protection: Protective clothing. Boots.
Environmental: Prevent from entering in public sewers or the immediate environment.

Stability and reactivity

10.1. Reactivity
Reactivity: Stable under recommended transport or storage conditions.
10.2. Chemical stability
Chemical stability: Stable under normal conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions.
Decomposition may occur on exposure to conditions or materials listed below.
10.4. Conditions to avoid
Conditions to avoid: Heat.
10.5. Incompatible materials
Materials to avoid: No data available.

Disposal considerations

Disposal operations: Transfer to a suitable container and arrange for collection by specialised disposal company.
Disposal of packaging: Dispose of in a regulated landfill site or other method for hazardous or toxic wastes.
NB: The user's attention is drawn to the possible existence of regional or national regulations regarding disposal