Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

General information: Remove from exposure. Remove contaminated clothing and shoes.
Consult a doctor if irritation develop or persist.
After inhalation: Remove to fresh air and monitor breathing. If breathing becoming difficult,
give oxygen and consult a physician. If breathing stops, give artificial
respiration and consult a physician.
After skin contact: Take off contaminated clothing immediately, wash the skin with plenty of
water and soap without any delay.
If irritation develop or persist seek medical advice.
After eye contact: Rinse the eyes with water for at least 20 minutes with eyelids open wide.
Obtain medical, ophthalmologic attention immediately.
After swallowing: Wash out the mouth with clear water if the patient is conscious.
Consult with a physician.

Most important symptoms and effects,
both acute and delayed:
Not available.

Indication of any immediate medical attention and special treatment needed:
No specific antidote.
Treat symptomatically and supportively.

Fire-fighting measures

Extinguishing media: Water spray, carbon dioxide, extinguishing powder, foam.

Unsuitable extinguishing media: Unknown.

Special hazards arising from the substance or mixture:
CO, CO2, HCl, SOx, NOx

Advice for firefighters: When extinguishing fires, use breathing apparatus with an independent source of air.

Fire hazard class „D” ­ Moderately flammable

Fire and explosion hazard Dust­air mixture: “B”­Fire and explosion hazard.
Packaged material: “D"­Moderate fire hazard.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:
Avoid breathing dust. Wear appropriate dust mask.
Avoid contact with eyes and skin.

Environmental precautions: Hinder substance from entering soil, sewers or living water.

Methods and material for containment
and cleaning up:
Collect the product carefully and place material into suitable, labelled
container for disposal. Avoid dispersion into air. Do not use synthethic
clothing, avoid spark generation.
Ventilate the effected area and wash spill site after
material pickup is complete. Don’t evacuate in the waste water system.
Wear protective equipment.

Handling and storage

Handling: Avoid contact with eyes.
Avoid contatc with skin.
Avoid generation of dust. Avoid inhalation of dust.
Safety measures: Suitable general and local exhaust ventillation is needed.
Minimize dust formation.
Fire and explosion protection measures:
Combustible material. Dust/air mixture may ignite or explode.
Take measures against electrostatic discharges.

Conditions for safe storage, including
any incompatibilities:
Keep in well­closed storage containers, in a cool and well­ventilated
Protect from light and moisture. Store below 25 °C.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

National occupational exposure limit values:
AK: Unknown ; CK: Unknown ; MK: Unknown
Other occupational exposure limit values:Not known.
Relevant regulations and recommended monitoring procedures:
91/322/EEC; 98/24/EC directives and its modifications (2000/39/EC, 2006/15/EC)
Exposure controls:

Appropriate engineering controls: Suitable general and local exhaust ventilation.
Closed system.

Personal protection equipment
Eye/face protection: Safety googles, face shield.
Hand protection: Protective gloves.
Respiratory protection Dust mask (FFP3) or gas mask with white, P3 filter cartridge.
Personal protection, general hygienic
Wash hands with soap and water thoroughly after handling.
Remove contaminated clothing. Wash before reuse.

Environmental exposure controlls: Dust exposure measurement in the workplace air environment.

Stability and reactivity

Reactivity: Hazardous reactivity is not established.

Stability: Stable at normal temperature and pressure.

Possibility of hazardous reactions: The substance has no hazardous reactivity. Organic substance, hazardous
reaction is possible with strong oxidizers, acids, bases.

Conditions to avoid (heat, pressure, light, shock):
The product is stable in normal storage conditions.

Incompatible materials: Avoid contact with strong acids, bases, and strong oxidising materials.

Hazardous decomposition products Not known.

Disposal considerations

Disposal of the product related waste:
Dispose the solid waste or incinerate in accordance of all state and local regulations. Burn the material in a chemical incinerator equipped with an
afterburner and scrubber.
Disposal of contaminated packaging:
Destroy empty packages.
Dispose according to the state and local regulations.
Relevant community, national and regional provisions:
Directive 2008/98/EC of the European Parliament and of the Council of 19November 2008 on waste Directive 91/689/EEC of hazardous wastes.