Registration Dossier

Physical & Chemical properties

Water solubility

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
water solubility
Type of information:
experimental study
Adequacy of study:
key study
Study period:
24 November 2016 to 25 April 2017
Reliability:
2 (reliable with restrictions)
Rationale for reliability incl. deficiencies:
guideline study with acceptable restrictions
Remarks:
no analytical determination of the water solubility was possible, therefore the result is based on visual observations
Qualifier:
equivalent or similar to
Guideline:
EU Method A.6 (Water Solubility)
Deviations:
yes
Remarks:
see below
Qualifier:
equivalent or similar to
Guideline:
OECD Guideline 105 (Water Solubility)
Deviations:
yes
Remarks:
see below
Principles of method if other than guideline:
The standard EC method A6 and OECD method 105 was not applicable to the substance due to the high indeterminable saturation levels produced. It was therefore not possible to prepare samples at five times the saturation level as recommended in the guidelines. No analysis could be performed for the main test due to the high solubility producing unfilterable mixtures. Therefore the water solubility was determined based on visual inspection.
GLP compliance:
yes (incl. certificate)
Type of method:
flask method
Key result
Water solubility:
> 5 - < 10 vol%
Conc. based on:
other: visual inspection
Incubation duration:
96 h
Temp.:
20 °C
pH:
>= 7.7 - <= 8
Remarks on result:
other: details see table below

Concentration (%w/w)

pH

 

5.04

7.7

Dark orange/amber colored solution with no excess test item

10.0

8.0

Dark orange/amber colored solution with excess test item

15.1

8.4

Dark orange/amber colored solution with excess test item

20.0

8.5

Dark orange/amber colored solution with excess test item

24.9

n/a

Dark orange/amber colored solid

50.0

n/a

Dark orange/amber colored solid

74.8

n/a

Dark orange/amber colored solid

94.8

n/a

Green solid

Conclusions:
The water solubility of the substance is 5-10%
Executive summary:

In a test using the flask method, water was added to increasing amounts of the substance. The increasing concentrations were inspected visually to assess solubility. The water solubility was between 5 and 10%. Analytical determination of the concentrations was not possible.

Description of key information

In a test using the flask method, water was added to increasing amounts of the substance. The increasing concentrations were inspected visually to assess solubility. The water solubility was between 5 and 10%. Analytical determination of the concentrations was not possible.

Key value for chemical safety assessment

Water solubility:
50 g/L
at the temperature of:
20 °C

Additional information