Registration Dossier

Administrative data

First-aid measures

General notes: Take off immediately all contaminated clothing.
In all cases of doubt, or when symptoms persist, seek medical advice.
Following inhalation: Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician.
Following skin contact: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention.
Following eye contact: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Remove contact lenses, if present and easy to do. Continue rinsing.
Following ingestion: Rinse mouth. Do not induce vomiting. Call a physician immediately.
Notes for the doctor: none

Fire-fighting measures

Suitable extinguishing media: water spray, alcohol resistant foam, fire extinguishing powder, carbon dioxide (CO2)
Unsuitable extinguishing media: water jet
Special hazards arising from the substance or mixture
Hazardous decomposition products: Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known.
Hazardous combustion products: carbon monoxide (CO), carbon dioxide (CO2)
Advice for firefighters: In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Do not allow firefighting water to enter drains or water courses.
Collect contaminated firefighting water separately. Fight fire with normal precautions from a reasonable distance. Keep containers cool with water spray.
Special protective equipment for firefighters: use suitable breathing apparatus

Accidental release measures

For non-emergency personnel: Remove persons to safety. Ventilate affected area. Wearing of suitable protective equipment (including personal protective equipment referred to under
Section 8 of the safety data sheet) to prevent any contamination of skin, eyes and personal clothing.
For emergency responders: Wear breathing apparatus if exposed to vapours/dust/spray/gases.
Environmental precautions: Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it. If substance has entered a water course or sewer, inform the responsible authority.
Advices on how to clean up a spill: Collect spillage. Absorbent material (e.g. sand, diatomaceous earth, acid binder, universal binder, sawdust, etc.).
Appropriate containment techniques: Use of adsorbent materials.
Other information relating to spills and releases: Place in appropriate containers for disposal. Ventilate affected area.

Handling and storage

Measures to prevent fire as well as aerosol and dust generation: Use local and general ventilation. Keep away from sources of ignition - No smoking.
Specific notes/details: None.
Measures to protect the environment: Avoid release to the environment.
Advice on general occupational hygiene: Avoid contact with skin and eyes. Avoid breathing gas/mist/vapours/spray. Do not eat, drink and smoke in work areas. Wash hands after use. Preventive skin protection (barrier creams/ointments) is recommended. Remove contaminated clothing and protective equipment before entering eating areas.
Conditions for safe storage, including any incompatibilities:
Flammability hazards: None.
Incompatible substances or mixtures
Incompatible materials: bases, oxidisers
Protect against external exposure, such as heat, humidity
Consideration of other advice: Keep away from food, drink and animal feedingstuffs. Keep container tightly closed and in a well-ventilated place. Storage temperature 2 - 8°C.
Ventilation requirements: Provision of sufficient ventilation.
Packaging compatibilities: Only packagings which are approved (e.g. acc. to ADR) may be used.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
2810
Shipping information
Proper shipping name and description:
UN2810, TOXIC LIQUID, ORGANIC, N.O.S., (diallyl maleate), 6.1, III, (E)
Chemical name:
Diallyl maleate
Language:
English
Labels:
6.1
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
2810
Shipping information
Proper shipping name and description:
UN2810, TOXIC LIQUID, ORGANIC, N.O.S., (diallyl maleate), 6.1, III, (E)
Chemical name:
Diallyl maleate
Language:
English
Labels:
6.1
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
2810
Shipping information
Proper shipping name and description:
UN2810, TOXIC LIQUID, ORGANIC, N.O.S., (diallyl maleate), 6.1, III
Chemical name:
Diallyl maleate
Labels:
6.1
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
2810
Shipping information
Proper shipping name and description:
UN2810, Toxic liquid, organic, n.o.s., (diallyl maleate), 6.1, III
Chemical name:
Diallyl maleate
Labels:
6.1
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters: No data available.
Exposure controls:
Appropriate engineering controls: General ventilation.
Individual protection measures (personal protective equipment):
Eye/face protection: Wear eye/face protection.
Hand protection:
Material Material thickness Breakthrough times of the glove material
IIR: isobutene-isoprene (butyl) rubber
≥ 0,5 mm >480 minutes (permeation: level 6)
FKM: fluoro-elastomer ≥ 0,4 mm >480 minutes (permeation: level 6)
CR: chloroprene (chlorobutadiene)
rubber
≥ 0,5 mm >240 minutes (permeation: level 5)
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Respiratory protection: In case of inadequate ventilation wear respiratory protection.
Environmental exposure controls:Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

Stability and reactivity

Reactivity: This material is not reactive under normal ambient conditions.
Chemical stability: The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Possibility of hazardous reactions: No known hazardous reactions.
Conditions to avoid: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Incompatible materials: bases, oxidisers
Hazardous decomposition products: Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known.

Disposal considerations

Waste treatment methods: This material and its container must be disposed of as hazardous waste.
Sewage disposal-relevant information: Do not empty into drains.
Waste treatment of containers/packagings: It is a dangerous waste; only packagings which are approved (e.g. acc. to ADR) may be used. Handle contaminated packages in the same way as the substance itself.
Remarks: Please consider the relevant national or regional provisions.