Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General advice:
Immediate medical attention is required.
Move out of dangerous area.
Show this safety data sheet to the doctor in attendance.

If inhaled:
If breathed in, move person into fresh air.
Consult a physician after significant exposure.

In case of skin contact:
Take off contaminated clothing and shoes immediately.
Rinse immediately with plenty of water.
Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.

In case of eye contact:
Rinse with plenty of water.
Get medical attention immediately. Continue to rinse during transport.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
Small amounts splashed into eyes can cause irreversible tissue damage and blindness.

If swallowed:
Clean mouth with water and drink afterwards plenty of water.
Never give anything by mouth to an unconscious person.
Take victim immediately to hospital.
Do not induce vomiting! May cause chemical burns in mouth and throat.

Most important symptoms and effects, both acute and delayed
The symptoms and effects are as expected from the hazards as shown in Hazards Identification. No specific product related symptoms are known.

Indication of any immediate medical attention and special treatment needed
Treat symptomatically.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Special hazards arising from the substance or mixture
Specific hazards during firefighting / Specific hazards arising from the chemical:
CAUTION: reignition may occur.
Supports combustion.
Water spray may be ineffective unless used by experienced firefighters.
Heating may cause decomposition with release of toxic fumes
Do not allow run-off from fire fighting to enter drains or water courses.

Combustion products:
Fire will produce smoke containing hazardous combustion products (see Stability and Reactivity).

Advice for firefighters
Special protective equipment for firefighters:
In the event of fire, wear self-contained breathing apparatus.

Further information:
Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Personal precautions:
Use personal protective equipment.
Ensure adequate ventilation.
Remove all sources of ignition.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.

Environmental precautions
Environmental precautions:
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.

Methods and materials for containment and cleaning up
Methods for cleaning up / Methods for containment:
Keep wetted with water.
Soak up with inert absorbent material and dispose of as hazardous waste.
Confinement must be avoided.
Never return spills in original containers for re-use.

Reference to other sections
Additional advice:
For personal protection see Exposure Controls/Personal Protection.

Handling and storage

Precautions for safe handling
Advice on safe handling:
For personal protection see Exposure Controls/Personal Protection.
Smoking, eating and drinking should be prohibited in the application area.
Open drum carefully as content may be under pressure.
Dispose of rinse water in accordance with local and national regulations.

Advice on protection against fire and explosion:
Use explosion protected equipment.
Keep away from sources of ignition - No smoking.
No sparking tools should be used.
Keep away from reducing agents (e.g. amines), acids, alkalies and heavy metal compounds (e.g. accelerators, driers, metal soaps).
Do not cut or weld on or near this container even when empty.
Keep away from combustible material.

Temperature class:
It is recommended to use electrical equipment of temperature group T3. However, autoignition can never be excluded.

Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
No smoking.
Electrical installations / working materials must comply with the technological safety standards.
Keep only in original container.
Store away from other materials.

Minimum storage temperature:
Avoid temperatures below: -10 °C

Maximum storage temperature:
25 °C

Other data:
No decomposition if stored and applied as directed.
If product freezes or separates, contact Akzo Nobel

Specific end use(s)
Specific use(s):
Consult the technical guidelines for the use of this substance/mixture.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 3105
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN 3105
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN 3105
Shipping information
Proper shipping name and description:
Organic Peroxide Type D, Liquid (cyclohexanone peroxide)
Chemical name:
Cyclohexanone peroxide
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN 3105
Shipping information
Proper shipping name and description:
Organic Peroxide Type D, Liquid (cyclohexanone peroxide)
Chemical name:
Cyclohexanone peroxide
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Engineering Controls
Explosion proof ventilation recommended.
Effective exhaust ventilation system
Ensure that eyewash stations and safety showers are close to the workstation location.

Personal protective equipment
Respiratory protection:
In the case of vapour or aerosol formation use a respirator with an approved filter.
Filter A

Hand protection:

Eye protection:
Tightly fitting safety goggles
Wear face-shield and protective suit for abnormal processing problems.

Skin and body protection:
Protective suit

Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.
When using do not eat or drink.
When using do not smoke.
Wash hands before breaks and at the end of workday.

Environmental exposure controls
General advice:
Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform respective authorities.

Stability and reactivity

Stable under normal conditions.

Chemical stability
Stable under recommended storage conditions.

Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.

Conditions to avoid
Conditions to avoid:
Confinement must be avoided.
Heat, flames and sparks.

Incompatible materials
Materials to avoid:
Contact with incompatible materials will result in hazardous decomposition.
For queries regarding the suitability of other materials please contact the supplier.
Do not mix with peroxide accelerators, unless under controlled processing.
Use only stainless steel 316, PP, polyethylene or glass-lined equipment.
Acids and bases
Reducing agents
Heavy metals

Hazardous decomposition products
Hazardous decomposition products:
Carbon oxides
Adipic Acid
Dodecanedioic acid
Hexanoic acid

Thermal decomposition:
SADT - (Self accelerating decomposition temperature) is the lowest temperature at which self accelerating decomposition may occur with a substance in the packaging as used in transport. A dangerous self-accelerating decomposition reaction and, under certain circumstances, explosion or fire can be caused by thermal decomposition at and above the SADT. Contact with incompatible substances can cause decomposition below the SADT.

Self-Accelerating decomposition temperature (SADT):
55 °C

Disposal considerations

Waste treatment methods
The product should not be allowed to enter drains, water courses or the soil.
Do not contaminate ponds, waterways or ditches with chemical or used container.
Hazardous waste
Dispose of contents/container in accordance with local regulation.

Contaminated packaging:
Empty remaining contents.
Dispose of as unused product.
Do not burn, or use a cutting torch on, the empty drum.
Due to the high risk of contamination recycling/recovery is not recommended.
Follow all warnings even after the container is emptied.