Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Auto flammability

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
relative self-ignition temperature (solids)
Type of information:
other: Company data
Remarks:
SDS data
Adequacy of study:
key study
Study period:
Not applicable - SDS data
Reliability:
1 (reliable without restriction)
Qualifier:
equivalent or similar to guideline
Guideline:
other: Internal Company methods
Deviations:
not applicable
Principles of method if other than guideline:
- Basic Principle
The metal powder or hydride to be tested is placed in a preheated ignition block and the temperature at which self-ignition occurs is noted.

- Procedure
The ignition block consists of an iron cube of 70 mm side length, with holes drilled for the material to be analyzed and a thermocouple. After inserting a thermometer or thermocouple, the block is pre-heated with a blower heater to a temperature just below the anticipated self-ignition point. A small quantity of the sample is then placed in the hole intended for the test material, and the block is heated further with the full blower flame until the powder self-ignites. The corresponding temperature is defined as the ignition point.
To ensure correct determination of the ignition point it is crucial to determine an approximate ignition temperature in preliminary experiments. For the actual measurement, the sample must be added about 10 °C below the predicted ignition point, or else a definite self-ignition will fail to take place.
GLP compliance:
no
Key result
Auto-ignition temperature:
ca. 248.54 °C
Remarks on result:
other: Internal data (SAP extract)
Conclusions:
Auto-ignition value for titanium hydride determined according an internal methods is reported to be ca. 248.54°C.

Description of key information

Key value for chemical safety assessment

Autoflammability / Self-ignition temperature at 101 325 Pa:
248.54 °C

Additional information