Registration Dossier

Administrative data

First-aid measures

INHALATION :
Move affected person to fresh air. Keep person warm and at rest. Get medical attention immediately. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. If unconscious, place in recovery position and get medical attention immediately.
INGESTION :
Wash out mouth with water. Keep person warm and at rest. Seek medical attention innediately.
SKIN CONTACT :
Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical a ttention immediately.
EYE CONTACT :
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Seek medical attention.
PROTECTION OF FIRST AIDERS :
Put on appropriate personal protective equipment (see Section 8). No action shall be taken involving any personal risk or without suitable training.

Fire-fighting measures

Extinguishing media Suitable extinguishing media:
use dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Specific hazards during firefighting:
Fine dust clouds may form explosive mixtures with air. Runoff to sewer may create fire or explosion hazard. Fire water contaminated with this material must be contained and prevented from being dis charged to any waterway, sewer or drain.
Prevent water used in emergency cases from entering sewers and drainage systems.
The decomposition products may contain the following substances :
carbon dioxide
carbone monoxide
nitrogen oxides
Advice for firefighters :
Personal precautions, protective equipment and emergency procedures .
Personal precautions: Evacuate personnel to safe areas. Promptly isolate the scene by removing all persons from the vicinity of the incident in case of fire.
Move containers away from the zone of fire if it present no risk.
Cool containers with a water jet sprayed.
Use personal protective equipment.
In the event of fire, wear autonomous self-contained breathing apparatus (SCBA) with full facial mask working in positive pressure mode.
Wear personal protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures :
Personal precautions: Evacuate unnecessary and unprotected personnel to safe areas. Neither touch nor walk in the wide-spread product. Do not breathe dust.
Provide adequate ventilation. Wear a protective respiratory apparatus when ventilation is inadequate and wear a personal protective equipment.
Environmental precautions : inform competent authorities in case of environmental pollution (sewers, leak s, ground, air) by the product.
Environnemental precautions : Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). May be harmful to the environment if released in large quantities.
Methods and material of containment and cleaning :
Prevent entry into sewers, water courses, basements or confined areas. Use a tool to scoop up solid or absorbed material and place into appropriate labelled waste container.

Handling and storage

Wear a suited personal protective equipment. Use spark-proof tools (ATEX tools) or explosion-proof equipment. Avoid contact with skin, eyes and clothing. Do not breathe dust. Avoid release to the environment. Provide sufficient air exchange and/or exhaust in work rooms.
wear appropriated breathing apparatus when ventilation is inadequate.
General advice on professional hygiene :
Handle in accordance with good industrial hygiene and safety practice.
Take off contaminated clothes et protective equipements before enter in catering area. It is recommendated to wash hands and face before eating, drinking or smoking.
Conditions for safe storage, including any incompatibilities :
Store in accordance with local regulations. Store in the original container. Store out of direct sunlight, in a dry cool and well-ventlated area, away from incompatible materials.
Use appropriated container to avoid ny contamination ofthe environment. Keep container tightly closed and sealed until ready for use.

Transport information

Land transport (ADR/RID)

UN number:
2811
Chemical name:
3-(2-(1,3-DIOXOLAN-2-YL)ETHYL)-7,8-DIMETHOXY-1H-BENZO[d]AZEPIN-2-ONE
Class:
6.1 (9)
Packaging group:
III
Labels:
6.1 + 9
Remarks:
Transport within user’s premises: always transport in closed containers that are upright and secure.
Ensure that persons transporting the product know what to do in the event of an accident or spillage.

Inland waterway transport (ADN(R))

UN number:
2811
Chemical name:
3-(2-(1,3-DIOXOLAN-2-YL)ETHYL)-7,8-DIMETHOXY-1H-BENZO[d]AZEPIN-2-ONE
Class:
6.1 (9)
Packaging group:
III
Labels:
6.1 + 9
Remarks
Transport within user’s premises: always transport in closed containers that are upright and secure.
Ensure that persons transporting the product know what to do in the event of an accident or spillage.

Marine transport (IMDG)

UN number:
2811
Chemical name:
3-(2-(1,3-DIOXOLAN-2-YL)ETHYL)-7,8-DIMETHOXY-1H-BENZO[d]AZEPIN-2-ONE
Class:
6.1 (9)
Packaging group:
III
Marine pollutant
Remarks
Transport within user’s premises: always transport in closed containers that are upright and secure.
Ensure that persons transporting the product know what to do in the event of an accident or spillage.

Air transport ICAO/IATA

UN number:
2811
Chemical name:
3-(2-(1,3-DIOXOLAN-2-YL)ETHYL)-7,8-DIMETHOXY-1H-BENZO[d]AZEPIN-2-ONE
Class:
6.1 (9)
Packaging group:
III
Labels:
6.1 (9)
Remarks
Transport within user’s premises: always transport in closed containers that are upright and secure.
Ensure that persons transporting the product know what to do in the event of an accident or spillage.

Additional transport information

Additional transport information
The environnementally hazardous substance mark may appear if required by other transportation
regulations

Tunnel code (E)

Exposure controls / personal protection

Exposure controls : No professional exposure limits
Individual personal protective equipment :anti-dust helmet type P3, safety glasses, appropriated gloves.
in case of use in a solvent, choose solvent-adapted gloves.
Wear adapted working clothes and safety shoes.
environment : In some cases, it will be necessary to equip the manufacturing process with a gas Purifier or a filter or to modify it to reduce emissions at acceptable levels.

Stability and reactivity

Reactivity : no specific available data
Chemical stability : the product is stable
Possible hazardous reactions : In the normal conditions of storage and use, no hazardous reaction are expected.
Conditions to avoid : Avoid dust formation during handling and avoid any ignition source (spark or flame).
Take all measures against electrostatic discharges.
Incompatible Compounds : Oxidising substances
Hazardous decomposition compounds : In the normal conditions of storage and use, no hazardous decomposition compound is expected.

Disposal considerations

Waste treatment methods :
Transfer to an adapted incineration treatment waste treatment plant meeting legal requirement regarding protection of environment and disposal of wastes. Manipulate with caution not cleaned nor rinsed containers. Avoid spreading of poured materials, avoid any contact with the ground, streams, sewers and drainage systems.