Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 946-958-1 | CAS number: -
Oxidising properties
Administrative data
Link to relevant study record(s)
- Endpoint:
- oxidising liquids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- The study was conducted between 10 - 11 July, 2014
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.21 (Oxidising Properties (Liquids))
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Contact with:
- powdered cellulose
- Duration of test (contact time):
- >= 60 s
- Sample tested:
- test mixture 1:1
- Remarks:
- with Cellulose
- Parameter:
- mean pressure rise time
- Result:
- 13 s
- Remarks on result:
- other: based on 5 separate tests
- Sample tested:
- reference mixture with 65% nitric acid + cellulose (1:1 ratio)
- Parameter:
- mean pressure rise time
- Result:
- 2 s
- Remarks on result:
- other: based on 5 separate tests
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- The sample of Aurantiol Pure was found to have a mean pressure rise time greater than that observed for the nitric acid reference sample. The sample is therefore not considered to be an oxidising liquid.
- Executive summary:
The oxidising properties of Aurantiol Pure were determined according to EU Method A.21 (Oxidising Properties (Liquids)).
The sample of Aurantiol Pure was found to have a mean pressure rise time greater than that observed for the nitric acid reference sample. The sample is therefore not considered to be an oxidising liquid.
Reference
|
Aurantiol Pure : Cellulose (1:1) |
65% nitric acid : Cellulose (1:1) |
Test 1 pressure rise time (sec) |
14.0 |
1.6 |
Test 2 pressure rise time (sec) |
14.0 |
1.8 |
Test 3 pressure rise time (sec) |
11.6 |
2.4 |
Test 4 pressure rise time (sec) |
13.0 |
1.7 |
Test 5 pressure rise time (sec) |
12.4 |
2.5 |
Mean pressure rise time (sec) |
13.0 |
2.0 |
30 % of mean value (sec) |
3.9 |
0.6 |
Acceptable data range (sec) |
9.1 – 16.9 |
1.4 – 2.6 |
Description of key information
The oxidising properties of Aurantiol Pure were determined according to EU Method A.21 (Oxidising Properties (Liquids)).
The sample of Aurantiol Pure was found to have a mean pressure rise time greater than that observed for the nitric acid reference sample. The sample is therefore not considered to be an oxidising liquid.
Key value for chemical safety assessment
- Oxidising properties:
- non oxidising
Additional information
Justification for classification or non-classification
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
