Registration Dossier

Physical & Chemical properties

Appearance / physical state / colour

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
appearance / physical state / colour
Type of information:
experimental study
Adequacy of study:
key study
Study period:
April 15 to May 07, 2014
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
test procedure in accordance with generally accepted scientific standards and described in sufficient detail
Justification for type of information:
Data come from the description of the test substance in the GLP report on another physico-chemical property. No guideline is required according to REACh TGD. The substance is considered to be adequately characterised. Therefore full validation applies.
Qualifier:
no guideline required
Principles of method if other than guideline:
Visual observation
GLP compliance:
yes (incl. QA statement)
Remarks:
inspected on 29 and 30 November 2010 / signed on 11 April 2011
Physical state at 20°C and 1013 hPa:
liquid
Key result
Form:
other: sticky paste like
Remarks:
"sticky paste like" as reported as observation during the preliminary test related to the determination of melting point of the substance and "pasty, orange brown to red" as reported in the description of the test item
Colour:
orange-brown to red-brown
Odour:
other: amber
Substance type:
organic
Conclusions:
The substance is orange-brown to red-brown sticky paste at room temperature and atmostpheric pressure.
Executive summary:

Data come from the description of the test substance reported in the GLP study report on physico-chemical property of the substance. Observations recorded during the pre-test related to the determination of the melting point of the substance were also reported as additional information.

Description of key information

Orange-brown to red-brown sticky paste at room temperature and atmospheric pressure.

Key value for chemical safety assessment

Physical state at 20°C and 1013 hPa:
liquid

Additional information

Data come from the description of the test substance or observations in the GLP reports on physico-chemical properties.

They are considered as key studies. The result is retained as key data.

Note that the melting range of the substance was determined to be between (-1.3 °C to 13.2 °C) (see endpoint 4.2, Laus, 2014), which is in accordance with the physical state considered at 20°C and 1013 hPa. Moreover, according to flowability test performed during the relative density determination (see endpoint 4.4, Laus,2014), it was observed that the test item was flowable at 55°C.