Registration Dossier

Administrative data

First-aid measures

- Following inhalation: fresh air. Consult doctor if feeling unwell.
- Following skin contact: wash off with plenty of water. Remove contaminated clothing.
- Following eye contact: rinse out with plenty of water with the eyelid held wide open. Call in ophthalmologist if necessary.
- Following ingestion: immediately make victim drink water (two glasses at most). Consult a physician.
- Most important symptoms and effects: We have no description of any toxic symptoms.

Fire-fighting measures

- Suitable extinguishing media: Water, Carbon dioxide (CO2), Foam, Dry powder
- Unsuitable extinguishing media: For this substance/mixture no limitations of extinguishing agents are given.
- Special hazards arising from the substance or mixture:
Combustible material.
Development of hazardous combustion gases or vapours possible in the event of fire.
Fire may cause evolution of:
Hydrogen fluoride
- Advice for fire fighter:
Special protective equipment for firefighters: Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.

Further information: Suppress (knock down) gases/vapours/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

- Personal precautions, protective equipment and emergency procedures: Avoid substance contact. Avoid inhalation of dusts. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Advice for emergency responders: Protective equipment

- Environmental precautions: Do not empty into drains.

- Methods and material for containment and cleaning up:
Cover drains. Collect, bind, and pump off spills.
Observe possible material restrictions (see sections 7 and 10).
Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.

Handling and storage

- Precautions for safe handling:
Advice on safe handling: Observe label precautions.

Hygiene measures: Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance.

- Conditions for safe storage, including any incompatibilities:
Storage conditions
Tightly closed. Dry.
Recommended storage temperature see product label.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

1. Control parameters
Contains no substances with occupational exposure limit values.

2. Exposure controls
- Engineering measures: Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.

- Individual protection measures: Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.

Eye/face protection: Safety glasses
Hand protection
full contact:
Glove material: Nitrile rubber
Glove thickness: 0.11 mm
Break through time: > 480 min
splash contact:
Glove material: Nitrile rubber
Glove thickness: 0.11 mm
Break through time: > 480 min

The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril® L (full contact), KCL 741 Dermatril® L (splash contact).
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet:

Other protective equipment
protective clothing

Respiratory protection
required when dusts are generated.
Recommended filter type: Filter P 1 (acc. to DIN 3181) for solid particles of inert substances.
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

- Environmental exposure controls.
Do not empty into drains.

Stability and reactivity

1. Reactivity : The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
2. Chemical stability: The product is chemically stable under standard ambient conditions (room temperature).
3. Possibility of hazardous reactions : no information available
4. Conditions to avoid: Strong heating.
5. Incompatible materials: no information available
6. Hazardous decomposition products: in the event of fire: See section "Firefighting measures".

Disposal considerations

Waste treatment methods
Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself.