Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 810-161-6 | CAS number: 1229654-66-3
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- self-heating substances / mixtures
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Study period:
- 9 to 12 November 2015
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- UN Manual of Tests and Criteria: Test N.4 (Test method for self-heating substances)
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- Hess, Ministerium für Umwelt, Energie, Landwirtschaft und Verbraucherschutz, Wiesbaden, Germany
- Test procedure:
- 100 mm sample cube at 140°C
- Max. temp. reached:
- 139
- Induction time (h):
- 12
- Result:
- negative outcome (no effect observed)
- Endpoint:
- substances / mixtures which in contact with water emit flammable gases
- Data waiving:
- study scientifically not necessary / other information available
- Justification for data waiving:
- other:
- Endpoint:
- pyrophoric solids
- Data waiving:
- study scientifically not necessary / other information available
- Justification for data waiving:
- the study does not need to be conducted because the substance is known to be stable in contact with air at room temperature for prolonged periods of time (days) and hence, the classification procedure does not need to be applied
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 16 July 2015
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- Hess, Ministerium für Umwelt, Energie, Landwirtschaft und Verbraucherschutz, Wiesbaden, Germany
- Key result
- Test procedure:
- burning rate test: preliminary screening test
- Remarks on result:
- substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
- Endpoint:
- flammable solids
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 17 Nov 2015
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- GLP compliance:
- yes (incl. QA statement)
- Remarks:
- Hess, Ministerium für Umwelt, Energie, Landwirtschaft und Verbraucherschutz, Wiesbaden, Germany
- Key result
- Test procedure:
- burning rate test: preliminary screening test
- Remarks on result:
- substance does not ignite and propagate combustion either by burning with flame or smouldering along 200 mm of the powder train within the 2 minutes test period
Referenceopen allclose all
After the measurement the mesh wire basket contained approximately 0.3 wt. % less test item than at the start.
Negative result was obtained in the test using a 10 cm sample cube at 140 °C the test item has not to be classified in division 4.2 (self-heating substances).
The test item, pure substance is not a highly flammable solid in the sense of EU Method A. 10.
The test item could not be ignited with a flame in the preliminary test. The test item melted.
The test item, technical substance is not a highly flammable solid in the sense of EU Method A. 10.
The test item was tested without pre-treatment and it could not be ignited with a flame. The test item melted.
Description of key information
No ignition in the preliminary burning rate test (EU Method A.10)
Based on experience in handling and use and the chemical structure pyrophoricity and flammability on contact with water are not to be expected.
The substance does not show self-heating behaviour (UN Test N.4)
Key value for chemical safety assessment
- Flammability:
- not classified
Additional information
Justification for classification or non-classification
The available data on flammability of the test substance do not meet the criteria for classification according to Regulation (EC) 1272/2008, and are therefore conclusive but not sufficient for classification:
No ignition in a test according EU Method A.10.
Based on chemical structure and experience in handling and use, pyrophoricity and flammability on contact with water are not expected.
The substance does not show self-heating behaviour according to UN Test N.4)
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
