Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

General information: Seek medical treatment.

After inhalation: Supply fresh air; consult doctor in case of complaints.

After skin contact:

Remove contaminated clothes immediately.

Immediately wash with water and soap and rinse thoroughly. Consult a doctor in case of complaints.

After eye contact:

Immediately rinse with a lot of water for several minutes. Remove contact lenses if possible. Continue rinsing. Consult an ophthalmologist in case of complaints.

After swallowing:

Call for a doctor immediately.

Rinse mouth with water. Do not induce vomitting. Consult a doctor in case of complaints.

Most important symptoms and effects, both acute and chronic: No further relevant information available.

Indication of any immediate medical attention and special treatment needed:

No further relevant information available.

Fire-fighting measures

Extinguishing media -

Suitable extinguishing agents: Use fire extinguishing methods suitable for surrounding conditions.

Special hazards arising from the substance or mixture:

Formation of toxic gases is possible during heating or in case of fire.

Advice for firefighters -

Protective equipment: Wear fully protective suit.

Wear self-contained breathing apparatus and protective suit. Do not inhale explosion gases or combustion gases.

Accidental release measures

Personal precautions, protective equipment and emergency procedures -

Ensure adequate ventilation before entering the area. Stay on the windward side.

Keep out unauthorized persons.

Wear appropriate protective devices (See Exposure Controls/Personal Protection).

Avoid contact with eyes and skin.

Do not swallow the product.

Environmental precautions: Prevent seepage into sewage system, workpits and cellars.

Methods and material for containment and cleaning up -

For a small amount of leakage: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders) or collect in an empty container that can be sealed tightly.

For a large amount of leakage: Enclose with banks to avoid outflow. Lead the leakage to a safe place and collect.

Handling and storage

Precautions for safe handling -

Ensure good ventilation/exhaustion at the workplace.

Do not handle until all safety precautions have been read and understood.

Information about fire - and explosion protection: Keep ignition sources away - Do not smoke.

Conditions for safe storage, including any incompatibilities -

Storage Requirements to be met by storerooms and receptacles:

Store in a cool and dry location. Prevent any seepage into the ground. Keep containers tightly sealed.

Information about storage in one common storage facility:

Further information about storage conditions -

Store in cool, dry conditions in well sealed receptacle. Protect from heat and direct sunlight.

Store containers in a well ventilated area. Store locked up.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters -

Ingredients with limit values that require monitoring at the workplace: Not required.

Exposure controls -

Personal protective equipment -

General protective and hygienic measures:

Wash hands before breaks and at the end of work. Do not eat or drink while working.

Keep away from tobacco products.

Respiratory protection:

Use respiratory protective device with filters for organic and acid gas (or airline respirators in some cases) if formation of toxic gases is possible while the product is heated.

Use respiratory protective device with organic gas cartridge.

Protection of hands: protective gloves

Material of gloves: Rubber

Penetration time of glove material

The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eye protection: safety glasses

Body protection: Protective work clothing

Stability and reactivity

Chemical stability -

Thermal decomposition / conditions to be avoided: To avoid thermal decomposition do not overheat.

Possibility of hazardous reactions: No dangerous reactions known under normal conditions of use.

Conditions to avoid: Keep away from heat, sparks, flame, high temperature.

Incompatible materials -

Strong acids, strong alkalis, alkali metals, alkali earth metals, powdered aluminium, zinc, beryllium.

Hazardous decomposition products: Danger of toxic fluorine based pyrolysis products.

Disposal considerations

Waste treatment methods  -


Wear appropriate protective devices.

Disposal must be made according to official regulations.

Uncleaned packaging -


Empty contaminated packaging thoroughly.

Disposal must be made according to official regulations