Registration Dossier

Diss Factsheets

Administrative data

First-aid measures

4.1. Description of first aid measures
General information
Remove soiled or soaked clothing immediately
After inhalation
When inhaled remove to fresh air and seek medical aid.
After contact with skin
In case of contact with skin wash off immediately with soap and water
After contact with eyes
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice
After ingestion
If swallowed do not induce vomiting,seek medical advice and show safety datasheet or label
4.2. Most important symptoms and effects, both acute and delayed
Symptoms
No symptoms known currently.
Hazards
No hazards known at this time.
4.3. Indication of any immediate medical attention and special treatment needed
Treatment
Treat symptomatically.

Fire-fighting measures

5.1. Extinguishing media
Suitable extinguishing media
water spray jet
foam
carbon dioxide
dry powder
5.2. Special hazards arising from the substance or mixture
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)
Nitrous gases (NOx)
5.3. Advice for firefighters
Special protective equipment for firefighting
Use self-contained breathing apparatus
Further information
Wear protective equipment.

Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
Wear suitable personal protective equipment.
6.2. Environmental precautions
Do not allow to enter drains or waterways
6.3. Methods and material for containment and cleaning up
Pick up with absorbent material (eg sand, sawdust). Rinse away rest with water

Handling and storage

7.1. Precautions for safe handling
Advice on safe handling
No special measures necessary if stored and handled as prescribed.
Hygiene measures
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.
Advice on protection against fire and explosion
Observe the general rules of industrial fire protection
7.2. Conditions for safe storage, including any incompatibilities
Further information on storage conditions
Keep container tightly closed in a cool, well-ventilated place, open and handle carefully.
7.3. Specific end use(s)
No further recommendations.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not restricted
Shippingopen allclose all
Labels:
not restricted
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not restricted
Shippingopen allclose all
Labels:
not restricted
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not restricted
Shipping information
Proper shipping name and description:
not restricted
Chemical name:
not restricted
Labels:
not restricted
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not restricted
Shipping information
Proper shipping name and description:
not restricted
Chemical name:
not restricted
Labels:
not restricted
Remarksopen allclose all

Additional transport information

Additional information
Special provisions / remarks / other:
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code (International
Bulk Chemicals Code)
No transport as bulk according IBC - Code.

Exposure controls / personal protection

8.1. Control parameters
Exposure limit values
Exposure limit values are not available.
DNEL/DMEL values
DNEL/DMEL values are not available.
PNEC values
PNEC values are not available.
8.2. Exposure controls
General protective measures
Avoid contact with skin
Avoid contact with eyes
Hand protection : For long-term exposure:
Butyl rubber gloves.
Minimum breakthrough time / gloves : 480 min
Minimum thickness / gloves 0,7 mm
For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum breakthrough time / gloves : 30 min
Minimum thickness / gloves 0,4 mm
These types of protective gloves are offered by various
manufacturers. Please note the manufacturers´ detailed
statements, especially about the minimum thickness and the
minimum breakthrough time. Consider also the particular
working conditions under which the gloves are being used.
Eye protection : safety glasses

Stability and reactivity

10.1. Reactivity
See section 10.3. "Possibility of hazardous reactions"
10.2. Chemical stability
Under normal conditions the product is stable.
10.3. Possibility of hazardous reactions
No hazardous reactions when stored and handled according to prescribed instructions.
10.4. Conditions to avoid
None known.
10.5. Incompatible materials
not known
10.6. Hazardous decomposition products
When handled and stored appropriately, no dangerous decomposition products are known

Disposal considerations

13.1. Waste treatment methods
Product
In accordance with local authority regulations, take to special waste incineration plant
Uncleaned packaging
Packaging that cannot be cleaned should be disposed of as product waste

Categories Display