Registration Dossier

Administrative data

First-aid measures

INHALATION: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
INGESTION: Rinse mouth. DO NOT induce vomiting.
SKIN CONTACT: Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.
EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Fire-fighting measures

EXTINGUISHING MEDIA: Fire can be extinguished using: Water spray, fog or mist. Alcohol resistant foam. Dry chemicals, sand, dolomite etc.
SPECIAL FIRE FIGHTING PROCEDURES: Uses supplied air respirator if product is involved in a fire. Cool containers exposed to flames with water until well after the fire is out.
UNUSUAL FIRE & EXPLOSION HAZARDS: May travel considerable distance to source of ignition and flash back.

Accidental release measures

PERSONAL PRECAUTIONS: Wear protective clothing.
ENVIRONMENTAL PRECAUTIONS: Avoid releease to the environment. Do not discharge into drains, water courses or onto the ground.
Dispose of waste recovered in accordance with applicable regulations. If the product contaminates waterways, rivers or drains, alert the relevant authorities in accordance with statutory procedures.
SPILL CLEAN UP METHODS: Extinugish all ignition sources. Avoid sparks, flames, heat and smoking. Ventilate. Clean-up personnel should use respiratory and/or liquid contact protection. Absorb in vermiculite, dry sand or earth and place into containers. Collect and reclaim or dispose in sealed containers in licensed waste.

Handling and storage

USAGE PRECAUTIONS:
Handling = Avoid spilling, skin and eye contact. Ventilate well, avoid breathing vapours.
Fire prevention = Keep away from heat, sparks and open flame.
Recommended equipment and procedures = Use approved respirator if air contamination is above accepted level.
Prohibited equipment and procedures = unknown.

STORAGE PRECAUTIONS:
Storage class = Flammable liquid storage. Corrosive storage.
Flammable/combustible - Keep away from oxidisers, heat and flames. The drums should be stored, with their seals intact, in conditions that avoid extremes of temperatures. Under these conditions the shelf life of the product should be approximately two years. If the product is to be stored in bulk containers, please contact Baker Hughes for advice on materials of construction of the containers.

Transport information

Land transport (ADR/RID)

UN number:
2924
Proper shipping name and description:
FLAMMABLE LIQUID, CORROSIVE, N.O.S. (contains isopropanol & quaternary ammonium salt)
Language:
English
Class:
Class 3: Flammable liquids.
Classification code:
3W
Packaging group:
III
Labels:
3 & 8
Remarks:
Hazard No. 38 Flammable liquid (flash-point between 23°C and 61°C, inclusive), corrosive.

Inland waterway transport (ADN(R))

UN number:
Not transported by inland waterway
Shippingopen allclose all
Class:
3
Packaging group:
III
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2924
Proper shipping name and description:
FLAMMABLE LIQUID, CORROSIVE, N.O.S. (contains isopropanol & quaternary ammonium salt)
Chemical name:
MK92K
Class:
3
Packaging group:
III
Labels:
3 & 8
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
2924
Proper shipping name and description:
FLAMMABLE LIQUID, CORROSIVE, N.O.S. (contains isopropanol & quaternary ammonium salt)
Chemical name:
MK92K
Class:
Class 3, sub-class 8
Packaging group:
III
Labels:
3 & 8
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Propan-2-ol:
Std = WEL; LT = 400 pm (999 mg/m³); ST = 500 ppm (1250 mg/m³).
INGREDIENT COMMENTS: WEL = Workplace Exposure Limits

PROTECTIVE EQUIPMENT: Safety goggles and eye shield, protective gloves, chemical respirator.
PROCESS CONDITIONS: Use engineering controls to reduce air contamination to permissible exposure level. Provide eyewash, quick drench.
ENGINEERING MEASURES: Explosion-proof general and local exhaust ventilation.
RESPIRATORY EQUIPMENT: Use chemical cartridge protection with appropriate cartridge. Chemical respirator with organic vapour cartridge.
HAND PROTECTION: Use protective gloves made of: Neoprene, nitrile, polyethylene or PVC.
EYE PROTECTION: Use safety goggles and face shield in case of splash risk.
HYGIENE MEASURES: Wash at the end of each work shift and before eating, smoking and using the toilet. Wash promptly with soap and water if skin becomes contaminated.

Stability and reactivity

STABILITY: No particular stability concerns.
CONDITIONS TO AVOID: Avoid contact with strong oxidisers.
HAZARDOUS POLYMERISATION: Will not polymerise.
MATERIALS TO AVOID: Strong oxidising substances.
HAZARDOUS DECOMPOSITION PRODUCTS: Vapours/gases/fumes of: Carbon dioxide (CO2). Carbon monoxide (CO). Oxides of: Nitrogen.

Disposal considerations

DISPOSAL METHODS: Absorb in vermiculite or dry sand, dispose in licensed hazardous waste. Dispose of waste and residues in accordance with local authority requirements.
WASTE CLASS: The definitive European Waste code for this product will depend upon the final use that is made of this material. If the material, as originally delivered is to be disposed of please contact Baker Hughes HSE Q&RA dept for assistance assigning the correct EU Waste Code.