Registration Dossier

Administrative data

First-aid measures

General advice:
Get medical attention if symptoms occur. Show this material safety data sheet to the doctor in attendance.
If inhaled:
Move to fresh air.
In case of skin contact:
Wash off with soap and plenty of water.
In case of eye contact:
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing.
If swallowed:
Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting.

Fire-fighting measures

Suitable extinguishing media:
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing media:
High volume water jet
Special protective equipment for fire-fighters:
In the event of fire, wear self-contained breathing apparatus.
Further information:
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. Prevent fire extinguishing water from contaminating surface water or the ground water system.

Accidental release measures

Personal precautions:
Avoid dust formation. Avoid breathing dust. Use personal protective equipment.
Environmental precautions:
Do not contaminate surface water.
Methods for cleaning up:
Contain spillage, pick up with an electrically protected vacuum cleaner or by wet-brushing and transfer to a container for disposal according to local regulations (see section 13 of SDS). Pick up and arrange disposal without creating dust. Keep in suitable, closed containers for disposal.

Handling and storage

Technical measures:
Ensure that eyewash stations and safety showers are close to the workstation location.
Local/Total ventilation:
Ensure adequate ventilation.
Advice on safe handling:
Avoid inhalation, ingestion and contact with skin and eyes. For personal protection see section 8 of SDS. Smoking, eating and drinking should be prohibited in the application area. Avoid creating dust.
Hygiene measures:
When using do not eat or drink. Wash hands before breaks and at the end of workday. Provide adequate ventilation. Do not breathe dust.
Requirements for storage areas and containers:
Keep container tightly closed in a dry and well-ventilated place.
Advice on common storage:
No special restrictions on storage with other products.
Other data:
Stable under normal conditions.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Exposure controls
Personal protective equipment
Eye protection:
Safety glasses with side-shields
Hand protection Material:
butyl-rubber
Ethyl Vinyl Alcohol Laminate (EVAL)
Nitrile rubber
Neoprene
PVC
Break through time > 8 h for:
butyl-rubber
Ethyl Vinyl Alcohol Laminate (EVAL)
Nitrile rubber
Neoprene
SDS_CH-AM – – 400001008428 5 / 10
Break through time 10 - 480 min for:
PVC
Remarks:
The suitability for a specific workplace should be discussed with the producers of the protective gloves. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Skin and body protection:
Dust impervious protective suit
Respiratory protection:
Respirator with a half face mask.
Recommended Filter type:
P1 filter

Stability and reactivity

Reactivity: Not classified as a reactivity hazard.
Chemical stability: The product is chemically stable.
Hazardous reactions: None known.
Conditions to avoid: None known.
Incompatible materials / Materials to avoid:
Strong acids and strong bases
Oxidizing agents
Hazardous decomposition products: No decomposition if stored normally.
Carbon oxides
Burning produces obnoxious and toxic fumes.

Disposal considerations

Waste treatment methods
Product:
Can be landfilled or incinerated, when in compliance with local regulations. Where possible recycling is preferred to disposal or incineration. Send to a licensed waste management company.
Contaminated packaging:
Empty remaining contents. Dispose of as unused product. Do not re-use empty containers.